SEAL-LIP TYPE 5M9735 - Caterpillar

There are three locations that a computer serial cable can be connected to the UPS in order to monitor settings, perform calibrations, view logfiles, and other service functions.Service account passwords can be obtained by contacting your Technical Communicator.Customer Connections Tray Serial Port
The customer connections tray RS-232 serial port is located and accessed from the top of the Controls Cabinet.This serial port is connected to the Graphics Master (GM) in the Controls Cabinet and provides access to both UPS and the data from the Flywheel Cabinet.Connection to this port will allow the service person to access detailed and summary telemetry data and log files for UPS and Flywheel Cabinet.No calibrations to the UPS or Flywheel Cabinets can be done from this port.Firmware for both the UPS and Flywheel Cabinets is updated via this port.Dual Network Interface Service Serial Port
The Dual Network Interface (DNI) RS-232 serial port is located on the right panel of the Controls Cabinet.The location of the Service serial port is Connector J7.Connecting to this serial port allows the service person to access the UPS detailed telemetry data and log file. This port must be