SEAL 5P2832 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Aeroshell #6 -
B - O-ring Lubricant -
C - OTC 28230 Press Dowel 1
D - HD 927/MS Light Grease -
E - Loctite 545 Thread Sealant -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Illustration 1 g06247866
Illustration 2 g06247860
Note the orientation of core (56) in Illustration 2.
Use Tooling (C), and a suitable press to install core (56).Note: Press core (56) until the fitting holes align at location (X).
Illustration 3 g06247835
Apply Tooling (A) to O-ring (54), and O-ring (55).
Install O-ring (54), and O-ring (55).
Illustration 4 g06247825
Apply Tooling (E) to the threads of fitting (52).
Install fitting (52).
Apply Tooling (A) to the ID of spool valve (53).
Install spool valve (53).
Illustration 5 g06247821
Install retainer (50), and spring (49).
Apply Tooling (B) to O-ring (51).
Install O-ring (51).
Illustration 6 g06247814
Apply Tooling (A) to O-ring (48).
Install O-ring (48).
Illustration 7 g06247791