SEAL 5P3193 - Caterpillar

Illustration 1 g00103219
Never bend the eyebolts and the brackets. Only load the eyebolts and the brackets under tension. Remember that the capacity of an eyebolt is less as the angle between the supporting members and the object becomes less than 90 degrees.When it is necessary to remove a component at an angle, only use a link bracket that is properly rated for the weight.
Use a hoist to remove heavy components. Use an adjustable lifting beam to lift the transmission. All supporting members (chains and cables) should be parallel to each other. The chains and cables should be perpendicular to the top of the object that is being lifted. Alterations to lifting eyes or fixtures will make lifting eyes and fixtures obsolete.Some removals require lifting fixtures in order to obtain proper balance and safety. For lifting objects, use properly rated cables and properly rated slings. Position the crane for a level lift of the transmission. Consult your Caterpillar dealer for information regarding fixtures for proper lifting of your transmission.Spreader bar widths should be sufficient for preventing contact with the transmission.Lifting points (1) and (2) can be used to tie down the transmission. Install the tie-downs at all locations.TH31 Well Servicing Transmission
Illustration 2 g01247700
(1) Lifting eye
(2) Threaded holes The weight of the TH31 Well Servicing Transmission with a dry sump is approximately 841 kg (1855 lb).The weight of the TH31DB Well Servicing Transmission with a dry sump is approximately 1250 kg (2755 lb).Install appropriate lifting eyes in threaded holes (1). Use an appropriate strap in lifting eye (1) and in the lifting eyes in threaded holes (2).TH35 Well Servicing Transmission
Illustration 3 g01247705
(1) Lifting eye
(2) Threaded holes The weight of the TH35 Well Servicing Transmission with a dry sump is approximately 973 kg (2145 lb).The weight of the TH35DB Well Servicing Transmission with a dry sump is approximately 1350 kg (2976.3 lb).Install appropriate lifting eyes in threaded holes (2). Use an appropriate strap in lifting eye (1) and in the lifting eyes in threaded holes (2).