5P5642 SEAL (use as required) Caterpillar parts
120G, 130G, 572G, 621B, 623B, 627B, 633D, 637D, 641B, 69D, 769, 769C, 769D, 770G, 770G OEM, 771C, 771D, 772B, 772G, 772G OEM, 773, 773B, 773D, 773E, 775B, 775D, 775E, 776, 776C, 776D, 777, 777B, 777D,...
Rating:
Alternative (cross code) number:
CA5P5642
5P-5642
5P5642
CA5P5642
5P-5642
5P5642
Weight: 1 pounds 0 kg.
COMPACT WHEEL LOADER, WHEEL TRACTOR,
Compatible equipment models: 5P5642:
Information:
Rotate the motor shaft every three months for motors with anti-friction bearings. Refer to the following procedure to properly rotate the rotor:
Illustration 1 g06146412
Rotor with shaft locking device attached
Remove the shaft locking device. Do not misplace any of the hardware associated with the locking device.
Ensure that the bearing is properly greased. Refer to the Operation and Maintenance Manual, SEBU8852, Roller Bearing - Check Section for further information on greasing the bearings.
Illustration 2 g06148923
Rotating the rotor by hand
Illustration 3 g06146423
Rotating the rotor using an M36 bolt
Turn the rotor by hand if possible. Make 10 and one-quarter revolutions. Rotating the rotor will keep the bearings lubricated. The shaft will also be repositioned to avoid sitting on the same spot for an extended period of time.If the rotor cannot be turned by hand, install an M36 bolt to the end of the draft end shaft. Use a large spanner or pipe wrench to rotate the shaft using the bolt. Refer to Illustration 3.
Reinstall the shaft locking device. Ensure that the bolts of the shaft locking device are properly torqued.
Illustration 1 g06146412
Rotor with shaft locking device attached
Remove the shaft locking device. Do not misplace any of the hardware associated with the locking device.
Ensure that the bearing is properly greased. Refer to the Operation and Maintenance Manual, SEBU8852, Roller Bearing - Check Section for further information on greasing the bearings.
Illustration 2 g06148923
Rotating the rotor by hand
Illustration 3 g06146423
Rotating the rotor using an M36 bolt
Turn the rotor by hand if possible. Make 10 and one-quarter revolutions. Rotating the rotor will keep the bearings lubricated. The shaft will also be repositioned to avoid sitting on the same spot for an extended period of time.If the rotor cannot be turned by hand, install an M36 bolt to the end of the draft end shaft. Use a large spanner or pipe wrench to rotate the shaft using the bolt. Refer to Illustration 3.
Reinstall the shaft locking device. Ensure that the bolts of the shaft locking device are properly torqued.
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
9D1521
SEAL
120G
120G
9D1520
SEAL
120G
120G
8D3902
SEAL-LIP TYPE
12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 160G, 160H, 160H ES, 160H NA, 160K, 160M, 160M 2,...
12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 160G, 160H, 160H ES, 160H NA, 160K, 160M, 160M 2,...
6V8081
SEAL-LIP TYPE
12G, 12H, 12H NA, 130G, 140G, 140H, 140H NA, 160G
12G, 12H, 12H NA, 130G, 140G, 140H, 140H NA, 160G
4D5497
SEAL-D-RING
12G, 12H, 12H ES, 12H NA, 12K, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 16, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
12G, 12H, 12H ES, 12H NA, 12K, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 16, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
7D8436
SEAL-D-RING
120H, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
120H, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
8D1791
SEAL
12G, 130G, 140G, 160G
12G, 130G, 140G, 160G
7D8884
SEAL
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, ...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, ...
7D8883
SEAL
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, ...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, ...
4337105
SEAL-PIN
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M 3, 140M 3 AWD, 143H, 160H, 16...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M 3, 140M 3 AWD, 143H, 160H, 16...
4D0907
SEAL
12G, 130G, 140, 140B, 140G, 14E, 14G, 16G
12G, 130G, 140, 140B, 140G, 14E, 14G, 16G
5F4258
SEAL
120G, 12G, 14G, 16G
120G, 12G, 14G, 16G
6N6718
SEAL
D9H
D9H
6P3595
SEAL GROUP
583K, D8H, D8K
583K, D8H, D8K
5P5651
SEAL 2.8 m(110.23 in.)
977L, 983B, D5, D6C
977L, 983B, D5, D6C
5P5661
SEAL .198 m(7.81 in.)
797F, D6C, D9N
797F, D6C, D9N
2J8431
SEAL KIT
191
191
5P5961
SEAL (use as required)
941, 955K, 955L, D4D
941, 955K, 955L, D4D
8N5661
SEAL
D6C
D6C
5J3942
SEAL
583K, D8H, D8K
583K, D8H, D8K
5P5640
SEAL (use as required)
120G, 12G, 130G, 140G, 14G, 16G, 518, 518C, 651E, 657E, 784B, 785, 785B, 789B, 793, 793B, 793C, 844K, 854K, 920, 941, 950, 955L, 977K, 977L, 983, 990K, 992K, 993K, 994H, D4E, D5, D5B, D5H, D6C, D6D, D...
120G, 12G, 130G, 140G, 14G, 16G, 518, 518C, 651E, 657E, 784B, 785, 785B, 789B, 793, 793B, 793C, 844K, 854K, 920, 941, 950, 955L, 977K, 977L, 983, 990K, 992K, 993K, 994H, D4E, D5, D5B, D5H, D6C, D6D, D...