SEAL-RING 5P6270 - Caterpillar

Illustration 1 g00860537
(1) Gauge panel (2) Control console (3) Control console (base)The control system provides operation, monitoring and system protection for the pumper. The control system consists of the following components: control console, digital gauges, mechanical gauges and battery disconnect switch. From the control console, the operator has the ability to control the truck engine and the deck engine. The operator can also control the transmissions and the pumps. Digital gauges and mechanical gauges are used in order to monitor the system parameters. The control console also incorporates pneumatic toggle switches which operate piping valves. Operating these valves allows the operator to control the process of cementing. Gauge Panel
Illustration 2 g00860540
(1) Panel illumination lights (2) "WORK LIGHTS" switch (3) Process indicator (4) Tachometer (5) Digital pressure gaugeWork Light
Work light (1) on the face of the gauge panel illuminates the control panel."WORK LIGHTS" switch
Switch (2) controls the work light.Process Indicator
Process Indicator (3) monitors the following characteristics: density of the cement, flow rate of the cement and volume of the cement.Tachometer
Tachometer (4) displays engine speed in rpm.Digital Pressure Gauge
Digital Pressure Gauge (5) provides a digital readout of the following features: discharge pressure, flow rate, total barrels that are pumped by the front triplex pump and total barrels that are pumped by the rear triplex pump. Additionally, the setting for the over pressure trip is programmed from the digital gauges.Control Console
Illustration 3 g00860542
(1) "FRONT PUMP LUBE PRESSURE" gauge (2) "LOCKUP" lamp (3) "ENGINE" lamp (4) "PRESSURIZER HYD." gauge (5) "PRESSURIZER HYD." valve (6) Transmission shifter (truck) (7) "MAKE-UP PUMP HYD." gauge (8) "MAKE-UP PUMP HYD." valve (9) Transmission shifter (deck) (10) "INJECTION PUMP HYD." gauge (11) "MASTER" switch (12) "INJECTION PUMP HYD." valve (13) "START" switch (14) "REAR PUMP LUBE PRESSURE" gauge (15) "AIR PRESSURE" gauge (16) "LMS SWITCH" (17) "LOCKUP" lamp (18) "ENGINE" lamp (19) "FRONT PUMP PROX RATE" switch (20) "REAR PUMP PROX RATE" switch (21) "START" switch (22) "TRUCK ENGINE THROTTLE" (23) "DECK ENGINE THROTTLE" (24) "TRUCK ENGINE SHUTDOWN" switch (25) "DECK ENGINE SHUTDOWN" switch (26) "FRONT PUMP SUCTION" valve (27) "TRUCK ENGINE TEMPERATURE" gauge (28) "TRUCK ENGINE PRESSURE" gauge (29) "INJECTION PUMP DISCHARGE" switch (30) "TRUCK TRANSMISSION TEMPERATURE" gauge (31) "TRUCK TRANSMISSION PRESSURE" gauge (32) "HEADER DRAIN" switch (33) "DECK TRANSMISSION TEMPERATURE" gauge (34) "DECK TRANSMISSION PRESSURE" gauge (35) "DECK ENGINE TEMPERATURE" gauge (36) "DECK ENGINE PRESSURE" gauge (37) "REAR PUMP SUCTION" valve"FRONT PUMP LUBE PRESSURE" gauge
"FRONT PUMP LUBE PRESSURE" gauge (1) displays the