SEAL-O-RING 6D7146 - Caterpillar

There may be several specific safety messages on your generator set. The exact location and a description of the safety messages are reviewed in this section. Become familiar with all safety messages.Ensure that all the safety messages are legible. Clean the safety messages or replace the safety messages if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap to clean the safety messages. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. The safety messages that are loosened could drop off the generator set.Replace any safety message that is damaged or missing. If a safety message is attached to a part of the generator set that is replaced, install a new safety message on the replacement part. Your Caterpillar dealer can provide new safety messages.
Illustration 1 g01317561
Side view of the generator set
Illustration 2 g06124701
Top view of the C4.4 generator set
Illustration 3 g01156220
Rear view of the C4.4 generator set
Illustration 4 g06124760
Illustration 5 g01317566
Side view of the C4.4 radiator equipped generator set.
Illustration 6 g01320748
Side view of the C4.4 radiator equipped generator set.
Illustration 7 g01316626
Typical C4.4 enclosure
Illustration 8 g06122301
View of the premium control panel
(2) Do not operate film
(6) Auto start film
(7) Electrical shock film
Illustration 9 g06122276
View of the MCS control panel and safety films
(1) Electrocution film
(2) Do not operate film
(6) Auto start filmElectrocution (1)
This safety message is positioned on both sides of the generator.
Illustration 10 g01392482
DANGER: Shock/Electrocution Hazard-Do not operate this equipment or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings will result in serious injury or death.
Do Not Operate (2)This safety message is on the control panel.
Illustration 11 g01370904
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death.
Lifting the Genset (3)This safety message for lifting the generator set is on the frame of the generator set.
Illustration 12 g01433231
Crushing Hazard! Improper lifting could cause serious injury or death. Follow the lifting instructions in the Operation and Maintenance Manual for safe lifting procedures.
Lifting the Genset (4)This safety message for lifting the genset is on the frame of the generator set.
Illustration 13 g01157717
Crushing Hazard! Improper lifting could cause serious injury or death. Follow the lifting instructions in the Operation and Maintenance Manual for safe lifting procedures.
No Ether In Air Inlet (5)This safety message for no ether in the air inlet is on body of the air cleaner and above intake on the enclosure.
Illustration 14 g01372254
If equipped with an air inlet heater (AIH) for cold weather starting, do not use aerosal types of starting aids such as ether. Such use could result in an explosion and personal injury.
Refer to Operation and Maintenance Manual, "Fire Prevention and Explosion Prevention" for more information.Automatic Starting (6)The safety message for automatic starting is on the control panel and