SEAL-RING 6J7693 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8T-5287     Wrench     1    
B     8S-2244     Pump Extractor     1    
C     8S-2241     Camshaft Bearing Tool Group     1    
D     4C-9581     Rack Zero Pin     1    
E     4C-4734     Wrench     1    
Illustration 1 g00797567
Remove five bolts and washers (1). Remove cover (2) and the gasket.
Illustration 2 g00797609
Disconnect receptacle (3) .
Put identification marks on wires (4) for assembly. Use Tool (B) to disconnect wires (4) .
Illustration 3 g00797576
Remove three bolts and washers (6). Remove bracket (5) and electronic control.
Illustration 4 g00797611
Remove five bolts and washers (8). Remove housing (9) and the gasket from fuel injection pump housing (10) .
Illustration 5 g00798251
Remove two bolts, one clip and two clamps (12) .
Remove solenoid (11) and the seal from housing assembly (9) .
Illustration 6 g00798253
Remove shutoff solenoid (13) with Tool (E) and the seal.
Illustration 7 g00798256
Remove receptacle (3) from clip (14) .
Remove two bolts,two washers (15), and clip (14) .
Illustration 8 g00798260
Remove lever (16) from housing (9) .
Illustration 9 g00798261