SEAL 6L8167 - Caterpillar

Loading UPSView
Refer to Operation and Maintenance Manual, SEBU7464, "Using Computer Software" for information on loading the UPSView software.UPSView Client Display
Illustration 1 g00931253
Client Display Window (2) Status tile (3) Expanded status tile (4) Telemetry tile (5) Text tile (6) Bar graph tile (7) Scrolling history graphThe UPS Client Display is the main interface for the UPSView software. The UPSView interface displays the data for the system. Each telemetry data point is a separate tile that may be configured to display data in one of the following methods:
Numerical
Bar Graph
Scrolling History GraphTelemetry
Floating Point Tiles
Floating Point Tiles describe the fluctuations within set parameters. These parameters include the following: temperatures, voltages and currents.Floating Point Tiles can be viewed in three different ways:
Small Tile
Bar Graph
Line GraphGraphics
Illustration 2 g00917897
Small Tile - This view of the Tile will only show the current telemetry data. This information is updated two times per second. The color of the data indicates the status of that telemetry channel. Green is OK. Yellow is a warning. Red is an error.
Illustration 3 g00917885
Bar Graph - When the upper left button on the tile is selected, the tile will expand into a bar graph that displays the same information but in a different format.
Illustration 4 g00917908
Line Graph - Open the Line graph by clicking the upper right-hand button that is located in the upper left-hand corner. The bar graph is displayed with the histogram. The Line graph displays the history of the tile. All line graphs are accessible to the crosshairs. Refer to the "Crosshair" section below. Approximately 2 minutes of information are stored in the graph.3-Phase Tile
Illustration 5 g00917859
Illustration 6 g00917866
Three Phase Tile are displays that are identical to Floating Point Tiles, except that all three phases of the telemetry channel are displayed in one tile.Note: The Bar graph is not available when crosshairs are use in the graphs. Refer to the "Crosshair" section below. The Left hand Three Phase Tile demonstrates a line graph without a crosshair. By placing the crosshairs on the image, the bar graph disappears. The bar graph is substituted with a variable display that is dependent upon time. Refer to the "Crosshair" section below.Status Tile
Illustration 7 g00784979
Status TileStatus tiles display the status of the system. If the colored light is green, the function is on. If the colored light is red, the function is off. In order to display the information as a graph, click the square in the top left corner of the tile.Note: There is no bar graph that is available for this tile.Expanded Status Tile
Illustration 8 g00784982
Expanded Status TileAn abbreviation is located below each of the lights. The abbreviation correlates to the name of the status list. When the tile is expanded, the full name of the Status List is displayed. The names are located to the left of the scrolling history graph.Integer Tile
Illustration 9 g00784989
Data TileInteger tiles display integer telemetry that is stored in the UPS. These telemetry channels are usually counters.Note: There is not a bar graph or a line graph that is available for this tile.Text Tile
Illustration 10 g00917777
The text tile