6T2815 SEAL GP-DUO-CONE Caterpillar parts
545, 545C, 966H, 966K, 966M, 972H, 972K, 972M
Rating:
Alternative (cross code) number:
CA6T2815
6T-2815
6T2815
CA6T2815
6T-2815
6T2815
Weight: 1 pounds 0 kg.
Information:
SEAL GROUP CLASS
D
SEAL RING 1E MATERIAL
1E1283
SEAL RING MATERIAL
STL
SEAL RING OD
256.67
mm
SEAL RING RAMP ANGLE
15
TORIC RING 1E MATERIAL
Silicone (VMQ) Rubber - 70 Duro
TORIC RING MATERIAL
RUBBER
WHEEL LOADER, WHEEL SKIDDER,
Compatible equipment models: 6T2815:
Number on catalog scheme:
23
For full view, you need register
Information:
This procedure checks the fuel transfer pump with a quick visual inspection of pump components. Refer to the Disassembly And Assembly module. Do not remove the governor from the engine in order to perform this procedure.
Illustration 1 g00608423
(1) Screen (if equipped) (2) Check valve (3) Spring (4) Bolt (5) Expansion plug (6) Passage (7) Piston assembly (8) Cam (9) Tappet (10) Sleeve assembly (11) O-ring seal
Inspect expansion plug (5) for leaking fuel. If the expansion plug is faulty, replace the fuel transfer pump. Refer to the Governor Service Manual, SENR6454.
Disconnect the inlet fuel line to the fuel transfer pump and check screen (1) (if equipped) for plugging.
Disconnect outlet fuel line for the fuel transfer pump.
Remove check valves (2). Ensure that the orientation of both check valves agrees with the illustration. Install new check valves if the sealing surfaces are rough, worn, or embedded with debris.
Sudden release of spring force can cause injury.To prevent the possibility of injury, follow the procedure to relieve the spring pressure.
There is a spring force behind the cover for the fuel transfer pump. When the bolts that hold the cover in position are removed, the spring force will be released. To prevent possible personal injury, hold the cover in position as the bolts are removed. Remove the cover for the fuel transfer pump by removing three bolts (4). Hold the cover in position and slowly remove the bolts.
Remove piston assembly (7) and sleeve assembly (10). A spring and a check valve are part of the piston assembly. Tappet (9) is part of the sleeve assembly. Inspect the tappet for unusual wear. Replace the sleeve assembly if the tappet shows unusual wear. Inspect the piston and the sleeve assembly. It is normal for the surface of the piston to be polished. Replace the piston and/or the sleeve assembly if excessive wear or deep scratches are present.Note: A shiny, circular wear pattern is normal.
Reassemble the governor components. Use two new O-rings (11) when the sleeve assembly is reinstalled.
Illustration 1 g00608423
(1) Screen (if equipped) (2) Check valve (3) Spring (4) Bolt (5) Expansion plug (6) Passage (7) Piston assembly (8) Cam (9) Tappet (10) Sleeve assembly (11) O-ring seal
Inspect expansion plug (5) for leaking fuel. If the expansion plug is faulty, replace the fuel transfer pump. Refer to the Governor Service Manual, SENR6454.
Disconnect the inlet fuel line to the fuel transfer pump and check screen (1) (if equipped) for plugging.
Disconnect outlet fuel line for the fuel transfer pump.
Remove check valves (2). Ensure that the orientation of both check valves agrees with the illustration. Install new check valves if the sealing surfaces are rough, worn, or embedded with debris.
Sudden release of spring force can cause injury.To prevent the possibility of injury, follow the procedure to relieve the spring pressure.
There is a spring force behind the cover for the fuel transfer pump. When the bolts that hold the cover in position are removed, the spring force will be released. To prevent possible personal injury, hold the cover in position as the bolts are removed. Remove the cover for the fuel transfer pump by removing three bolts (4). Hold the cover in position and slowly remove the bolts.
Remove piston assembly (7) and sleeve assembly (10). A spring and a check valve are part of the piston assembly. Tappet (9) is part of the sleeve assembly. Inspect the tappet for unusual wear. Replace the sleeve assembly if the tappet shows unusual wear. Inspect the piston and the sleeve assembly. It is normal for the surface of the piston to be polished. Replace the piston and/or the sleeve assembly if excessive wear or deep scratches are present.Note: A shiny, circular wear pattern is normal.
Reassemble the governor components. Use two new O-rings (11) when the sleeve assembly is reinstalled.
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
14G, 14H, 14H NA, 14M, 814, 814B, 814F, 814F II, 815, 815B, 815F, 815F II, 816F, 816F II, 824K, 825K, 826K, 966C, 966D, 966F, 966F II, 966G, 966G II, 966H, 966K, 966M, 966M XE, 970F, 972G, 972G II, 97...
14G, 14H, 14H NA, 14M, 16, 814, 814B, 814F, 814F II, 815, 815B, 815F, 815F II, 816F, 816F II, 966C, 966D, 966F, 966F II, 966G, 966G II, 966H, 966K, 970F, 972G, 972G II, 972H, 972K
966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE
966G II, 966H, 972G II, 972H
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 1390, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 16...
322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D LN, 324E LN, 325 LN, 325B L, 325C, 325D, 325D L, 328D LCR, 329D LN, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 3...
322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D LN, 324E LN, 325 LN, 325B L, 325C, 325D, 325D L, 328D LCR, 329D LN, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 3...
16M, 966M, 966M XE, 972M, 972M XE
330C, 330D L, 330D MH, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 374D L, 374F L, 515, 525, 525B, 525C, 535...
2470C, 2570C, 2670C, 2864C, 525B, 525C, 525D, 533, 535B, 535C, 535D, 543, 545, 545C, 545D, 553C, 555D, 563C, 573C, 586C, HA770, HA771, HA870, HA871, TK370, TK371, TK380, TK381
2470C, 2570C, 2670C, 2864C, 525B, 525C, 525D, 533, 535B, 535C, 535D, 543, 545, 545C, 545D, 553C, 555D, 563C, 573C, 586C, HA770, HA771, HA870, HA871, TK370, TK371, TK380, TK381
545, 545C, 545D, 555D
950G II, D9R, D9T
1672571
SEAL-WIPER
950G II
950G II
345C L, 349E L HVG, 980G II, 980H
2696417
SEAL AS-U-CUP
345C L, 349E L HVG, 980G II, 980H
345C L, 349E L HVG, 980G II, 980H
2696416
SEAL-LIP TYPE
345C L, 349E L HVG, 980G II, 980H
345C L, 349E L HVG, 980G II, 980H
990 II, 990H, 990K
2415790
SEAL-O-RING
834K, 844H, 988K, 990H, D10N, D10R, D10T, D11R, D11T, D9T
834K, 844H, 988K, 990H, D10N, D10R, D10T, D11R, D11T, D9T
773F, 775F, 844H, 990H, AD55B, AD60
950H
322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D LN, 324E LN, 325 LN, 325B L, 325C, 325D, 325D L, 328D LCR, 329D LN, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 3...
322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D LN, 324E LN, 325 LN, 325B L, 325C, 325D, 325D L, 328D LCR, 329D LN, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 3...
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 1390, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 16...