SEAL A 6T2986 - Caterpillar

AFFECTED PRODUCT
Model Identification Number
793F CMD RBT00111-00171
PARTS NEEDED
Qty
Part Number Description
1 3416783 SWITCH-ETHERNET
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 28% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
****Parts Stock ****
Remove all 341-6783-02 Ethernet Switch and earlier change levels from dealer parts stock.
****Affected Product****
1.1 Prepare the truck for rework
Refer to the Operation and Maintenance Manual.
? Raise and pin the truck bed.
? Turn OFF the engine.
? Turn OFF the master power disconnect switch.
? Lockout the engine starter.
1.2 Locate Ethernet Switch 4
? Switch 4 is located in the back of the truck cab. Refer to Image 1.
1.3 Remove and Replace Switch
? Note the cable connector positions on the switch.
? Remove the cables from the switch.
? Remove the four mounting bolts securing the switch (save the hardware).
? Install the new ethernet switch, change 03 or greater using the existing hardware.
? Reinstall the cable connectors.
1.4 Restore Truck to Service
? Verify the switch and all connectors are secured.
? Ensure all tools are removed.
? Check Switch Power
a. With the engine still OFF.
b. The lockout for the engine starter still applied.
c. Turn ON the master power disconnect switch.
d. Visually check the ethernet switch 4 power indicator light turns on (is green)
? Reinstall access covers.
? Restore system per local procedures.
Image1
SERVICE CLAIM ALLOWANCES
****Parts Stock****
Submit one claim for all parts removed from dealer parts stock.
****Affected Product****
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-10000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job
PARTS DISPOSITION
****Parts Stock****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
****Affected Product****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.