SEAL-O-RING 6V4365 - Caterpillar

Indicator Lamps
The functions of the indicator lamps are designed to display the maximum amount of information on the minimum number of lamps. The layout and the function of the indicator lamps is dependent on the type of control panel. The following types of control panel are used:
Electronic Modular Control Panel (EMCP 4.2)
Marine Class Society (MCS) control panelEMCP 4.2 Control Panel
Illustration 1 g03575676
EMCP 4.2 Control Panel (1) Alarms acknowledge key (2) Reset shutdown key (3) Event log (4) Run key (5) Auto key (6) Stop key (7) Up key (8) Left key (9) Right key (10) OK key (11) Down key (12) Escape key (13) Main menu key (14) Engine overview key (15) AC overview key (16) Display screenOn the EMCP 4.2 control panel, two lamps are installed. The lamps are the "Warning" lamp (above the Alarms Acknowledge key) and the "Shutdown" lamp (above the Reset Shutdown key).Yellow Warning Lamp - A flashing yellow warning lamp indicates that there are active warnings that have not been acknowledged. In order to acknowledge the warnings, press the Alarms Acknowledge key (1). If there are no longer any active warnings, then the lamp will turn off. If active warnings still exist, then the lamp will change from flashing yellow to solid yellow. A solidly illuminated yellow warning lamp indicates that there are acknowledged warnings that are still present.Red Shutdown Lamp - A flashing red shutdown lamp indicates active shutdown events that have not been acknowledged. In order to acknowledge the shutdown events, press the Alarms Acknowledge key (1). If there are no longer any active shutdown events, then the lamp will turn off. If active shutdown events still exist, then the lamp will change from flashing red to solid red. A solidly illuminated red shutdown lamp indicates that there are active shutdown events that have been acknowledged.Note: Any condition that has caused a shutdown event must be manually reset.The "AC Overview" key (15) can be used to display output information for the alternator on the display screen (16). Refer to the documentation for the control panel for more information.The "Engine Overview" key (14) can be used to display engine information and event codes on the display screen (16) .MCS Control Panel
Illustration 2 g03576036
(17) Emergency stop button (18) Display screen (19) Overspeed lamp/acknowledge key (20) High coolant temperature lamp/acknowledge key (21) Log key (22) Low oil pressure lamp/acknowledge key (23) View key (24) Shutdown override lamp/ key (25) Menu up key (26) Maintenance lamp/reset key (27) Power lamp (28) Self test lamp (29) Alarm acknowledge lamp (30) Menu right key (31) Menu select key (32) Lamp test key (33) Menu down key (34) Menu back key (35) Menu left key (36) Remote operation lamp (37) Mode key (38) Generator status lamp (39) Engine operating lamp (40) Stop/Reset key (41) Start key (42) Jump key (43) Info key (44) Alarm lampOn the MCS control panel, the following lamps are installed:
The "Overspeed" lamp (19)
The "Coolant Temperature" lamp (20)
The "Low Oil Pressure" lamp (22)
The "Shutdown Override" lamp