SEAL-O-RING 6V5188 - Caterpillar

Machine Configuration
Table 1
Required Tools    
Part Number     Description     Quantity    
JEBD3003     Caterpillar Electronic Technician (Cat® ET)     1    
317-7485     Communications Adapter 3 (CA3)     1    
370-4617     Cable As (USB CA3/PC Communication)     1    
327-8981     Adapter Cable As (CA3/Data Link)     1    
Table 2
Transmission    Application Code    
1500 HP E70     7000    
1125 HP E70     7010    Note: The 275-5120 Communication Adapter II Gp was canceled and replaced by the 317-7484 Communication Adapter 3 Gp . However, the 275-5120 Communication Adapter II Gp can still be used. Use the Caterpillar Electronic Technician service tool (Cat® ET) to access the configuration screen. Cat® ET is designed to run on a modern WindowsTM compatible personal computer. Note:
For instructions on how to use Cat® ET, refer to the "Getting Started Guide" . At the top menu of Cat® ET, click "Help " > "Getting Started Guide".
A "Troubleshooting Guide" is also available within Cat® ET, click "Help " > "Troubleshooting". The Troubleshooting Guide provides information, tips, and procedures on the following:
Licensing Errors
Ethernet Direct Connection
Communication Adapter (CA2 and CA3)ECM configuration is necessary after the ECM has been replaced. The ECM parameters should be configured before a calibration is started.Checking the configuration screen can help resolve a problem with the transmission. A problem with a component could be identified as one of the following items:
The component is not installed.
The component is installed but a change to the installation is needed to correct a problem.Follow these instructions to get to the configuration screen:
Illustration 1 g03347515
Connecting the 317-7484 Communication Adapter Gp (1) Personal Computer (PC) (2) 370-4617 Cable As (3) 317-7485 Communication Adapter