SEAL-O-RING 6V7991 - Caterpillar

There may be several specific safety messages on your generator set. The exact location and a description of the safety messages are reviewed in this section. Please become familiar with all safety messages.Ensure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap to clean the safety messages. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. The safety messages that are loosened could drop off of the engine.Replace any safety message that is damaged or missing. If a safety message is attached to a part of the engine that is replaced, install a new safety message on the replacement part. Your Caterpillar dealer can provide new safety messages.
Illustration 1 g00997405
Illustration 2 g01024480
Illustration 3 g01024694
Illustration 4 g01024708
Hot Surface (1)This safety message for hot surfaces is located on top of the enclosure, on the sides of the radiator and on the engine.
g01023637
Hot surface! Do not touch!
Automatic Starting (2)This safety message for automatic starting is located on the side of the enclosure and the control panel.
g01023635
When the engine is in the AUTOMATIC mode, the engine can start at any moment. To avoid personal injury, always remain clear of the the engine when the engine is in the AUTOMATIC mode.
Do Not Operate (3) This safety message is located on the rear of the enclosure and the control panel.
g00920070
Do not operate or work on this engine or generator set unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals.Failure to follow the warnings and instructions could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Lifting the Genset (4)This safety message for lifting the genset is located on the side of the enclosure for enclosed gensets.
g01023710
Crushing Hazard! Improper lifting could cause serious injury or death. Follow the lifting instructions in the Operation and Maintenance Manual for safe lifting procedures.
Electrical Shock (5)This safety message is located on the sides of the generator.
g01018792
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
Electrocution (6)This safety message for electrocution is located on the sides and the rear of the generator.
g00920549
: Shock/Electrocution Hazard-Read the Operation and Maintenance Manual. Could cause serious injury or death.
Lifting the Genset (7) This safety message for lifting the genset is located on the frame rails for open gensets.
g01024607
Crushing Hazard! Improper lifting could cause serious injury or death. Follow the lifting instructions in the Operation and Maintenance Manual for safe lifting procedures.
Do Not Climb (8)This safety message is located on the starting motor.
g00327774Do not climb on the generator set. Personal injury may result. Use an adequate ladder or use an appropriate work platform for climbing.Hot Coolant Under Pressure (9)This safety message is located