SEAL GP-CRANKSHAFT 7C1813 - Caterpillar

Illustration 4 g01067566
This safety message is located in the cab.
Electrocution Hazard! Keep the machine and attachments a safe distance from electrical power. Stay clear 3 m (10 ft) plus twice the line insulator length. Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions and warnings will cause serious injury or death
Refer to Operation and Maintenance Manual, "Specifications" for further information.Crushing Hazard (8)This safety message is located in the cab on the right side window.
g01304425
Crushing Hazard! Keep the work tool away from the cab during operation. Personal injury or death may result if the work tool contacts the cab during operation.
Seat Belt (9)
Illustration 5 g01067563
This safety message is located in the cab.
A seat belt should be worn at all times during machine operation to prevent serious injury or death in the event of an accident or machine overturn. Failure to wear a seat belt during machine operation may result in serious injury or death.
Refer to Operation and Maintenance Manual, "Seat Belt" for the proper service procedure.Hot Radiator (10)This warning is located on the coolant reservoir which is adjacent to the supply tube.
g01203348
The coolant is hot and the coolant is under pressure. Do not touch the hot surfaces. Refer to the Operation and Maintenance Manual for the procedure to follow when you check the radiator.
Do Not Spray Ether (11)This warning is located on the Air Filter housing and on the engine inlet manifold.
g01203349
Do not use ether. This machine is equipped with glow plugs. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the engine starting procedure in the Operation and Maintenance Manual.
Improper Connections for Jump Start Cables (12) This warning is located on the support assembly next to the battery.
g01067366
IMPROPER JUMPER CABLE CONNECTIONS CAN CAUSE EXPLOSION RESULTING IN PERSONAL INJURY.BATTERIES MAY BE LOCATED IN SEPARATE COMPARTMENTS. WHEN USING JUMPER CABLES, ALWAYS CONNECT POSITIVE (+) CABLE TO POSITIVE (+) TERMINAL OF BATTERY CONNECTED TO STARTER SOLENOID AND NEGATIVE (-) CABLE FROM EXTERNAL SOURCE TO STARTER NEGATIVE (-) TERMINAL (IF MACHINE NOT EQUIPPED WITH STARTER NEGATIVE TERMINAL, CONNECT TO ENGINE BLOCK.) FOLLOW PROCEDURE IN THE OPERATION MANUAL.
Refer to Operation and Maintenance Manual, "Engine Starting with Jump Start Cables" for further information.Rotating Fan (13)This warning is located on the cover of the fan on the radiator or on the hydraulic oil cooler unit.
g00935996
Rotating fan blades can result in personal injury or death.Stop the engine and allow the fan to come to a complete stop before making any test or adjustment.Before starting the engine, make sure all of the finger guards are installed and the guard door is closed. Do not allow any tools or test equipment to protrude or vibrate into the path of the rotating fan blades.