SEAL-LIP TYPE 7D9201 - Caterpillar

Advisor Display Operation and Configuration
Illustration 1 g03337392
The "Service Mode" menu can be found by scrolling up and down on the home page. Refer to Illustration 1.
Illustration 2 g03337411
Once in the "Service Mode" screen, press the "OK" button to toggle to "Service Mode: Enable". Refer to Illustration 2.
Illustration 3 g03337767
Press the "Back" button until the homepage is reached. Scroll through the home page for the "Settings" menu. Press "OK" to enter the "Settings" menu. Refer to Illustration 3.
Illustration 4 g03337797
Inside the "Settings" menu locate the "Chassis" menu and press the "OK" button. Refer to Illustration 4.
Illustration 5 g03337819
Inside the "Chassis" screen find the "Tire Monitoring" menu and press the "OK" button. Refer to Illustration 5.
Illustration 6 g03337923
Once inside the "Tire Monitoring" menu the following options can be changed:
Front axle cold inflation pressure
Rear axle cold inflation pressure
Installation status for all tires
Sensor ID numbers for all tires
Barometric pressure compensationRefer to Illustration 6.When the necessary changes are made, back out to the home page to access the pages that show "Pressure", "Temperature", and "Temperature Compensated Pressure".
Illustration 7 g03338007
Scroll through the home page to find the "Service" menu and press "OK". Refer to Illustration 7.
Illustration 8 g03338023
Once in side the "Service" menu select "Service Parameters" and press "OK". Refer to Illustration 8.
Illustration 9 g03338026
Once inside the "Service Parameters" menu select "Sort By Type" and press "OK". Refer to Illustration 9.
Illustration 10 g03338029
Once in side the "Sort By Type" menu select "Tire Monitoring" and press "OK". Once inside the "Tire Monitoring" the following parameters will be available to look at:
All tire pressures
All tire temps
All temperature compensated tire pressures