7R3458 SEAL Caterpillar parts
CB-534B, CB-534C, CB-634, CP-563, CS-583
Rating:
Alternative (cross code) number:
CA7R3458
7R-3458
7R3458
CA7R3458
7R-3458
7R3458
Weight: 0.02 pounds 0 kg.
VIBRATORY COMPACTOR,
Compatible equipment models: 7R3458:
Number on catalog scheme:
9
For full view, you need register
Information:
Configuring the G407 Monitor Display to Hold a Static Flashing IP Address
With some managed switches on onboard haul trucks, an IP conflict with the G407 monitor display may exist. This conflict will cause a loss of packet communications on the display. Thus causing the GPS, payload, Remote Tools, and other systems to stop working. This loss is because the onboard managed switch will not allow the monitor display to hold a static address (for Cat® MineStar System) and a dynamically requested address (for service). These symptoms will usually manifest within an hour of rebooting the display while the truck is running.If you run into the situation, the G407 can be configured to request the service IP as a static address. Perform the following procedure following to set up the monitor display service address to be requested as a static IP:
Modify the topeconfig text file to set the service IP to 165.26.79.190. Do not make each truck hold a different IP as all traffic from this IP should be kept captive to the network of the truck.Note: If you set the IP to a different value than 165.26.79.190, flashing with Cat® Electronic Technician (Cat ET) may not function.
Illustration 1 g06011801
Developer menu
Access the developer menu. This action can be done by including the toolbar icon in the topeconfig file ($ Tools XX =12) or by touching the pattern shown above. Refer to Illustration 1.
Illustration 2 g06011805
"RPA Static IP..." menu
Navigate to "Options", "RPA Static IP...". Refer to Illustration 2.
Accept the "OK" button on the popup screen. Tope (Fleet Onboard) will restart. The service IP address has now been set to a static setting of 165.26.79.190.
The managed onboard switch will need to have settings changed to keep all traffic from this address onboard the truck. Each manufacturer of network hardware will set up in a different fashion. Contact your switch vendor if necessary. The example shown is a 3-DP Hornet. Note the programmed 165.26.79.190 address on the port that the monitor display is connected to.
Restart all onboard hardware to make sure that all changes have been applied.Service IP Address Conflict
The service address is used so that Cat ET can flash over Ethernet. At start-up, the display searches for a service address. The display will lock on an address once an address is identified as not in use. After it has identified and assigned an address, another unit may be identified with the same service address. This creates a conflict, and an error message is generated. The error message is from the OS and must be acknowledged or the display power cycled to clear.To reduce the possibility of message being cleared manually, a monitoring app has been introduced to close the warning message automatically, eliminating the need for the operator to intervene. This app constantly looks for the popup to appear and will close the message up to the number of configured times. This is configured in the "StartupScript.bat" file and includes the line "start \Storage\NetMon.exe /c:10" where 10 is the number of times that
With some managed switches on onboard haul trucks, an IP conflict with the G407 monitor display may exist. This conflict will cause a loss of packet communications on the display. Thus causing the GPS, payload, Remote Tools, and other systems to stop working. This loss is because the onboard managed switch will not allow the monitor display to hold a static address (for Cat® MineStar System) and a dynamically requested address (for service). These symptoms will usually manifest within an hour of rebooting the display while the truck is running.If you run into the situation, the G407 can be configured to request the service IP as a static address. Perform the following procedure following to set up the monitor display service address to be requested as a static IP:
Modify the topeconfig text file to set the service IP to 165.26.79.190. Do not make each truck hold a different IP as all traffic from this IP should be kept captive to the network of the truck.Note: If you set the IP to a different value than 165.26.79.190, flashing with Cat® Electronic Technician (Cat ET) may not function.
Illustration 1 g06011801
Developer menu
Access the developer menu. This action can be done by including the toolbar icon in the topeconfig file ($ Tools XX =12) or by touching the pattern shown above. Refer to Illustration 1.
Illustration 2 g06011805
"RPA Static IP..." menu
Navigate to "Options", "RPA Static IP...". Refer to Illustration 2.
Accept the "OK" button on the popup screen. Tope (Fleet Onboard) will restart. The service IP address has now been set to a static setting of 165.26.79.190.
The managed onboard switch will need to have settings changed to keep all traffic from this address onboard the truck. Each manufacturer of network hardware will set up in a different fashion. Contact your switch vendor if necessary. The example shown is a 3-DP Hornet. Note the programmed 165.26.79.190 address on the port that the monitor display is connected to.
Restart all onboard hardware to make sure that all changes have been applied.Service IP Address Conflict
The service address is used so that Cat ET can flash over Ethernet. At start-up, the display searches for a service address. The display will lock on an address once an address is identified as not in use. After it has identified and assigned an address, another unit may be identified with the same service address. This creates a conflict, and an error message is generated. The error message is from the OS and must be acknowledged or the display power cycled to clear.To reduce the possibility of message being cleared manually, a monitoring app has been introduced to close the warning message automatically, eliminating the need for the operator to intervene. This app constantly looks for the popup to appear and will close the message up to the number of configured times. This is configured in the "StartupScript.bat" file and includes the line "start \Storage\NetMon.exe /c:10" where 10 is the number of times that
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3114, 3116, 3126, 320B, 322 FM L, 322B L, 322B LN, 322C, 322C FM, 325 L, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, ...
120B, 120G, 12F, 12G, 12H, 12H ES, 12H NA, 130G, 140, 140B, 140G, 140H, 140H ES, 140H NA, 141, 143H, 14E, 14G, 14H, 14H NA, 153, 16, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA, 1673C, 16G, 16H, 16H N...
120M, 120M 2, 12M, 216, 228, 236, 2384C, 247, 2470C, 248, 2484C, 2570C, 267, 2670C, 287, 3034, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 307, 312, 312B L, 312C, 312E, 312E L, 314E CR, 314E LCR, 315, 315...
3054, 3054B, 3056, 307, 312, 315, 317, 416B, 416C, 426C, 428B, 428C, 436C, 438C, 914G, AP-800C, BG-225B, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-544, CB-545, CP-433C, CS-323C, CS-431C, IT14G, ...
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 135H, 135H NA, 140G, 140K, 140K 2, 160K, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 32...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
120G, 12G, 130G, 140G, 14G, 160G, 16G, 350, 365B, 365B II, 365B L, 365C, 365C L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 446B, 446D, 508, 5080, 5090B, 5110B, 5130, 5130B, 5230, 5230B, 623E, 65, 65C, ...
35, 45, 55, 735, 735B, 740, 740B, CB-534C, CB-634C, CP-433C, CP-433E, CP-44, CP-533E, CP-54B, CP-56, CP-68B, CS-323C, CS-423E, CS-431C, CS-433E, CS-44, CS-531C, CS-531D, CS-533C, CS-533D, CS-533E, CS-...
120H, 12H, 135H, 215B, 215C, 215D, 219D, 225, 225D, 229, 2290, 229D, 231D, 2390, 2391, 2491, 307, 312C, 312D, 315C, 315D L, 318C, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B FM LL, 320B U, 320C, 32...
12M, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 312B L, 312C, 315B L, 317, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 450E, 535D, 545D, 554, 559, 613G, 908, 914G, 924G,...
3114, 3116, 3126, 3126B, 578, 583R, 589, 834B, 836, 854G, 988B, 992, AP-1000, AP-1000B, AP-1055B, AP-900B, BG-2455C, BG-245C, C-9, C7, C9, CB-434, CP-563, CS-531C, CS-533C, CS-563C, CS-573C, CS-583, C...
24H, 3406B, 611, 615C, 621F, 621G, 623E, 623F, 623G, 627F, 627G, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 725, 730, 735, 740, 768C, 769C, 769D, 770, 771C, 771D, 772, 772B, 773B, 773D, 773E, 7...
584, CB-534B, CB-534C, CB-634, CP-433C, CP-433E, CP-44, CS-323C, CS-423E, CS-433C, CS-433E, CS-44, PM-465, PM-565
1113765
SEAL-AIR
CB-534B, CB-535B
CB-534B, CB-535B
1097776
SEAL-DUST
CB-434B, CB-434C, CB-534, CB-534B, CB-534C, CB-535B, CS-431C, P16
CB-434B, CB-434C, CB-534, CB-534B, CB-534C, CB-535B, CS-431C, P16
1072869
SEAL
CB-434B, CB-434C, CB-434D, CB-44B, CB-534B, CB-534C, CB-534D, CB-535B, CB-544, CB-545, CB-54B, CB-634, CB-634C, CB-634D, CD-54B, CP-433E, CP-44, CS-423E, CS-431C, CS-433E, CS-44, CS-533C, CS-563C, PF-...
CB-434B, CB-434C, CB-434D, CB-44B, CB-534B, CB-534C, CB-534D, CB-535B, CB-544, CB-545, CB-54B, CB-634, CB-634C, CB-634D, CD-54B, CP-433E, CP-44, CS-423E, CS-431C, CS-433E, CS-44, CS-533C, CS-563C, PF-...
1851606
SEAL-PISTON
AP-1000B, AP-1055B, AP-800C, AP-900B, BG-225C, BG-2455C, BG-245C
AP-1000B, AP-1055B, AP-800C, AP-900B, BG-225C, BG-2455C, BG-245C
1153661
SEAL-O-RING
AP-1000B, AP-1055B, AP-800C, AP-900B, BG-225C, BG-2455C, BG-245C, CP-433C, CS-323C, CS-433C
AP-1000B, AP-1055B, AP-800C, AP-900B, BG-225C, BG-2455C, BG-245C, CP-433C, CS-323C, CS-433C
1067764
SEAL-SHAFT
CB-434B, CB-534B, CB-634
CB-434B, CB-534B, CB-634
1067523
SEAL-O-RING
CB-434B, CB-534B, CB-535B, CB-634
CB-434B, CB-534B, CB-535B, CB-634
1145295
SEAL
CB-434B, CB-434C, CB-534B, CB-534C, CP-433C, CS-431C
CB-434B, CB-434C, CB-534B, CB-534C, CP-433C, CS-431C
1145294
SEAL-BACKUP
CB-434B, CB-434C, CB-534B, CB-534C, CP-433C, CS-431C
CB-434B, CB-434C, CB-534B, CB-534C, CP-433C, CS-431C
1070296
SEAL-SHAFT
CB-534B, CB-534C, CB-544, CB-545, CB-634, CB-634C, CP-433C, CS-431C, CS-573C, CS-583C
CB-534B, CB-534C, CB-544, CB-545, CB-634, CB-634C, CP-433C, CS-431C, CS-573C, CS-583C
1069325
SEAL-O-RING
CB-534B, CB-534C, CB-634, CB-634C, CP-433C, CS-431C
CB-534B, CB-534C, CB-634, CB-634C, CP-433C, CS-431C