SEAL KIT- 7X2672 - Caterpillar

7X2672 SEAL KIT- Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA7X2672
7X-2672
7X2672

Weight: 0.53 pounds 0 kg.

Buy SEAL KIT- 7X2672 Caterpillar genuine, new aftermarket tractor parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Stevens Lake Parts One New Cylinder Seal Kit Fits CAT, Fits Caterpillar 936, 936E, 936F, G936, IT28B Models Interchangeable with 7X2672, 7X2672-A

$55.99

06 Aug 2025
0.6[0.27] Pounds
US: RAParts Inc.

Stevens Lake Parts One New Cylinder Seal Kit Fits CAT, Fits Caterpillar 936, 936E, 936F, G936, IT28B Models Interchangeable with 7X2672, 7X2672-A
Stevens Lake Parts Rod: 2 1/2", Bore: 5 1/2" || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications. || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications.

RAParts 7X2672 New Excavator Lift Cylinder Seal Kit Fits CAT IT28B 936 936E +

$55.99

06 Aug 2025
0.6[0.27] Pounds
US: RAParts Inc.

RAParts 7X2672 New Excavator Lift Cylinder Seal Kit Fits CAT IT28B 936 936E +
Reliable Aftermarket Parts Rod: 2 1/2", Bore: 5 1/2" || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.

RAParts 7X2672 Fits CAT Replacement Seal Kit IT28B, 936, 936E, 936F, G936

$55.99

06 Aug 2025
0.6[0.27] Pounds
US: RAParts Inc.

RAParts 7X2672 Fits CAT Replacement Seal Kit IT28B, 936, 936E, 936F, G936
Reliable Aftermarket Parts One New Aftermarket Replacement Cylinder Seal Kit || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Replaces Part Numbers: 7X2672 || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product.

Show more prices Caterpillar parts

For full view, you need register

Information:

Illustration 1 g00631263
Schematic of the Solenoid for the Right Steering Brake
This diagnostic code is for the Solenoid for the Right Steering Brake.This diagnostic code is recorded when current of the solenoid is below normal. Note: Ensure that the CID 0690 FMI 05 for the solenoid is on hold and that the fault present indicator shows "SERV CODE". Test Step 1. CHECK THE SOLENOID.
Turn the key start switch to the ON position. Do not start the engine. Ensure that CID 0690 FMI 05 for the solenoid is on hold and that the fault present indicator shows "SERV CODE".
Place the parking brake switch in the OFF position.
Disconnect the machine harness from the solenoid.
At the machine harness connector for the solenoid, place a jumper from contact 1 to contact 2.
Observe the status of the fault present indicator. Expected Result:"SERV CODE" is displayed and "SERV CODE" is not displayed as the jumper is installed and the jumper is removed. Results:
YES - "SERV CODE" is displayed and "SERV CODE" is not displayed as the jumper is installed and the jumper is removed. Repair: The circuit is correct. The solenoid is faulty. Repeat this step in order to verify the solenoid failure. Replace the solenoid.STOP
NO - "SERV CODE" is not displayed as the jumper is installed and the jumper is removed. The diagnostic code remains. Proceed to Test Step 2.Test Step 2. CHECK THE SOLENOID CIRCUIT FOR AN OPEN.
Turn the key start switch to the OFF position.
Disconnect the machine harness connectors J1 and J2 from the ECM.
At the machine harness connector for the solenoid, place a jumper from contact 1 to contact 2.
At machine harness connector J2, measure the resistance from the solenoid signal contact to J2-3 . Expected Result:There should be less than 5.0 ohms resistance.Results:
OK - There is less than 5.0 ohms resistance. The machine harness is correct. Proceed to Test Step 3.
NOT OK - There is not less than 5.0 ohms resistance.Repair: There is an open circuit in the machine harness. The open is in the wire for the solenoid signal or in wire 975-WH(White) of the machine harness. Repair the machine harness or replace the machine harness.STOPTest Step 3. DETERMINE IF THE DIAGNOSTIC CODE IS STILL ACTIVE.
Inspect the contacts and clean the contacts of the harness connectors.
Reconnect all harness connectors.
Turn the key start switch to the ON position.
Enter service mode of the Caterpillar Monitoring System and clear all inactive diagnostic codes.
Operate the machine.
Stop the machine and place the parking brake switch in the ON position.
Determine if the CID 0690 FMI 05 for the solenoid is present . Expected Result:CID 0690 FMI 05 for the solenoid is present. "SERV CODE" is showing.Results:
YES - CID 0690 FMI 05 for the solenoid is present. "SERV CODE" is showing.Repair: Exit this procedure and perform the diagnostic code procedure again. If the problem persists, the ECM may have failed. Prior to replacing an ECM, always contact your dealership's Technical Communicator for possible consultation with Caterpillar. This consultation may