AVSPARE.COM
parts catalog

SEAL KIT- 7X2720 - Caterpillar


7X2720 SEAL KIT- Caterpillar parts
Rating:
18
Alternative (cross code) number:
CA7X2720
7X-2720
7X2720
Caterpillar 7X2720 SEAL KIT-
Weight: 0.100 pounds 0 kg.

Buy SEAL KIT- 7X2720 Caterpillar genuine, new aftermarket tractor parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$113.78

06 Aug 2025

US: suslostore
PHUOC LOC THO for 7X2720 Cylinder Seal Kit Fits Caterpillar
PHUOC LOC THO For 7X2720 Cylinder Seal Kit Fits Caterpillar || Cylinder seal kit designed to fit equipment, ensuring sealing and performance. || Includes essential seals and components to maintain the of the cylinder system, compatible with MPN 7X2720. || Upgrade Your Gear, Upgrade Your Performance – Choose Our Reliable Replacement Parts. || To ensure a perfect fit and make an informed decision, we encourage you to carefully review both the product's dimensions and visually inspect it in the provided photos.
$113.78

06 Aug 2025

US: prysiazh
RATION for 7X2720 Tilt Cylinder Seal Kit Fits Fits Caterpillar D7A-D7G D8-D8H D9G
RATION For 7X2720 Tilt Cylinder Seal Kit Fits Fits Caterpillar D7A-D7G D8-D8H D9G || Seal kit designed for D7AD7G, D8D8H, D9G models to repair and maintain tilt cylinders efficiently. || Ensures sealing and functionality for the hydraulic system, enhancing the performance of your heavy equipment. || Elevate your garden beauty with our precision garden replacement parts. || To ensure compatibility, please check the product dimensions and review the provided images closely.
$80.99

06 Aug 2025
1.0[0.45] pounds
US: RAParts Inc.
Cylinder Seal Kit Fits Caterpillar Replaces 7X2720
Reliable Aftermarket Parts OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
  For full view, you need register

Information:


Illustration 1 g00633884
Schematic of the Modulating Valve for Speed 3 (Number 3)
This diagnostic code is for the Modulating Valve for Speed 3 (Number 3).See Systems Operation, "Solenoid Valves" for help with the identification of the locations of the solenoids.This diagnostic code is recorded when the current of the solenoid is below normal. Note: Ensure that CID 0693 FMI 05 for the solenoid is on hold and that the diagnostic code indicator shows "SERV CODE". Test Step 1. CHECK THE SOLENOID AND THE INTERNAL HARNESS FOR THE TRANSMISSION.
Turn the key start switch to the ON position. DO NOT START THE ENGINE. Ensure that CID 0693 FMI 05 is on hold and that the diagnostic code indicator shows "SERV CODE".
At the transmission case, disconnect the machine harness from the internal harness for the transmission.
At the machine harness connector that was disconnected from the transmission case, place a jumper from the solenoid signal contact to the return contact.
Observe the status of the diagnostic code indicator. Expected Result:"SERV CODE" is displayed and "SERV CODE" is NOT displayed as the jumper is installed and the jumper is removed. The action alarm will sound when the diagnostic code indicator changes. Results:
YES - "SERV CODE" is displayed and "SERV CODE" is NOT displayed as the jumper is installed and the jumper is removed. The circuit is correct. The solenoid or the internal harness for the transmission has failed. Proceed to Test Step 2.
NO - "SERV CODE" does not change as the jumper is installed and the jumper is removed. The diagnostic code remains. Proceed to Test Step 3.Test Step 2. CHECK THE RESISTANCE OF THE SOLENOID.
Disconnect the internal harness of the transmission from the solenoid that is suspected.
At the solenoid, measure the resistance between the two contacts of the solenoid connector. Expected Result:The resistance should be less than 15 ohms.Results:
OK - The resistance is less than 15 ohms.Repair: The resistance for the solenoid is correct. The internal harness of the transmission has failed. Either the wire for solenoid signal or wire 975-WH(White) is open in the internal harness of the transmission. Repair the internal harness of the transmission or replace the internal harness for the transmission.STOP
NOT OK - The resistance is not less than 15 ohms.Repair: The solenoid is failed. Replace the solenoid.STOPTest Step 3. CHECK THE SOLENOID CIRCUIT FOR AN OPEN.
Turn the key start switch to the OFF position.
Disconnect the machine harness connectors J1 and J2 from the ECM.
The jumper that was installed in a previous step remains installed.
At machine harness connector J1 or J2, measure the resistance from the solenoid signal contact to J2-3 orJ1-7. Expected Result:There should be less than 5.0 ohms resistance.Results:
OK - There is less than 5.0 ohms resistance. The machine harness is correct. Proceed to Test Step 4.
NOT OK - There is not less than 5.0 ohms resistance.Repair: There is an open circuit in the machine harness. The open is in the wire for the solenoid signal or


Parts seal Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.