SEAL KIT- 7X2794 - Caterpillar

REBE6505-00
23Sep2010
U-390
Priority
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RATING LABEL ON CERTAIN C2.2 POWERED GENERATING SETS
7405 7557 PI31805
This Program must be administered as soon as possible.When reporting the repair, use "PI31805" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Codeand "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI31805" as the Part Number, "7751" as the Group Number,"96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
The information supplied in this service letter may not be valid after the termination date of this program.Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
COMPLETION DATE
TERMINATION DATE
31Mar2011 30Sep2011
PROBLEM
The existing rating label on certain C2.2 powered Generating Sets contains the wrong transient response data associated with the generator.
AFFECTED PRODUCT
Model Identification Number
C2.2 GBE00176, 180, 190, 193-194, 196, 199, 202, 241-242, 248-249, 255, 268, 272-273, 283, 297, 302, 305-311, 315, 318, 320, 334, 348, 366, 374, 384, 449-451
PARTS NEEDED
Qty
Part Number Description
1 LABEL ORDER BY E-MAIL (See Action Required)
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 29% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Order a new rating label and replace the existing label with the new label when the new label is received.
Ordering a new label:
A rating label which displays the correct transient response data can be obtained by sending an e-mail to CPI with the following information:
1. Generating Set Serial Number.
2. Engine Serial Number.
3. Generator Serial Number.
4. Mailing address for new rating label.
Installation of new rating Label:
1. Remove the old rating label from its location on the Generating set.
2. Clean the surface, ensuring that is clean and free from dust.
3. Remove the backing from the new rating label and apply to the Generating set.
OWNER NOTIFICATION