SEAL-LIP TYPE 7X4775 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Remove the heat shield from the turbocharger.
Illustration 1 g00663079
Loosen clamp (1). Loosen hose clamp (2). Remove elbow (3) .
Illustration 2 g00663082
Disconnect three oil hoses (4) .
Illustration 3 g00663085
Typical example
Loosen two clamps (7). Remove hose (8) .
Loosen clamp (5). Disconnect turbocharger (10) from exhaust pipe (9) .
Remove the tube assembly from the bottom of the turbocharger.
Remove four locknuts (6) .
Remove turbocharger (10). The weight of the turbocharger is 26 kg (57 lb).