SEAL-O RING 7Y1455 - Caterpillar

(1) Torque for the adapter ... 45 5 N m (33.0 4.0 lb ft) (2) 159-3781 Spring Length under test force ... 7.6 mm (0.30 inch) Test force ... 24.0 2.0 N (5.40 0.45 lb) Free length after test ... 17.46 mm (0.687 inch) Outside diameter ... 14.28 mm (0.562 inch) (3) Apply an adequate amount of 1P-0808 Multipurpose Grease to the bracket and to the plunger on surfaces that move. (4) 153-8946 Spring Length under test force ... 4.000 mm (0.1575 inch) Test force ... 24.0 2.4 N (5.40 0.50 lb) Free length after test ... 5.20 mm (0.205 inch) Outside diameter ... 10.0 mm (0.39 inch) (5) Before assembly, apply 4C-4030 Thread Lock Compound to the threads of the pilot valve pivot. Apply an adequate amount of 1P-0808 Multipurpose Grease to the moving parts on the pilot valve plate. (6) Do not allow the hex to turn when you install the handles. (7) Before assembly, apply 4C-4030 Thread Lock Compound to the threads of the bolt. Torque for the bolt ... 28 4 N m (21.0 3.0 lb ft) (8) Apply an adequate amount of 1P-0808 Multipurpose Grease to the pin and the surfaces of the cartridges that move. (9) 202-1233 Pilot Cartridge Valve Gp for the DUMP position 153-8926 Spring Length under test force ... 8.00 mm (0.315 inch) Test force ... 3.7 0.2