SEAL-O-RING 8C0562 - Caterpillar

Illustration 1 g03069758
Table 1
Specification for 9Y-0136 Fuel Injection Pump Gp, 111-1775 Fuel Injection Pump Gp, 382-3697 Fuel Injection Pump Gp and 385-6933 Fuel Injection Pump Gp
Item Qty Part Specification Description
- - - Prior to installation of the fuel injector group, lubricate the bore in the cylinder head with 1P-0808 Multipurpose Grease. Use the clamp to press the injector into the bore. Do not tap on the top surface of the injector.
1 1 4P-3487 Injector Spring Length under test force is 81.99 mm (3.228 inch).
Test force is 280 14 N (63 3 lb).
Free length after test is 87.38 mm (3.440 inch).
B - - Injection timing dimension is 87 mm (3.4 inch).
2 1 4F-7226 Bolt Torque to 65 7 N m (48 5 lb ft).
3 1 4W-3565 Injection Rack Marked teeth on rack (11) and gear (10) must mesh.
4 1 5P-8065 O-Ring Seal Lubricate the bore lightly with 1P-0808 Multipurpose Grease.
5 2 194-9584 O-Ring Seal Lubricate the bore lightly with 1P-0808 Multipurpose Grease.
6 1 194-5067 Case As Torque to 140 12 N m (103 9 lb ft).
7 1 6V-1250 O-Ring Seal Lubricate the bore lightly with 1P-0808 Multipurpose Grease.
8 1 6V-9178 O-Ring Seal Lubricate the bore lightly with 1P-0808 Multipurpose Grease.
9 1 7C-9795 Cone Torque to 75 5 N m (55 4 lb ft).