SEAL AS 8C9138 - Caterpillar

Table 1
Part Number    Tool    Description    
        TEST EQUIPMENT    
225-8266     Ammeter Tool Gp     Clamp-on Ammeter, 0 to 500 Amp range, AC and DC    
155-5175     AC Current Probe     AC current probe, 0 to 1000 Amp for the 146-4080 Digital Multimeter Gp    
146-4080     Digital Multimeter Gp     Digital, RS-232 output, true RMS, used for measuring voltage, current, and resistance    
9U-7330     Digital Multimeter Gp     Digital, for measuring voltage, current, and resistance    
6V-7070     Digital Multimeter Gp     Digital, heavy-duty, used for measuring voltage, current, and resistance    
7X-1710     Multimeter Probe     Used with 6V-7070 Digital Multimeter    
4C-6500     Digital Thermometer     For measuring temperature in degrees Celsius    
142-5055     Insulation Testing Gp     Megohmmeter for measuring insulation resistance    
1H-3110     Bearing Puller Gp     For changing the bearings and exciter armature    
1H-3107     Push-Puller Tool Gp     For changing the bearings and exciter armature    
        SPECIAL TOOLS    
N/A     Resistive Bridge     For measuring resistance of windings    
N/A     Protective Gloves     Electrical, rubber, 13,800 V    
        STANDARD TOOLS    
6V-3001     Crimp Tool     For crimping Sure Seal connectors    
8S-1075     Crimp Tool     Heavy duty crimping and stripping    
1U-5804     Crimp Tool     For crimping Deutsch connectors    
1U-7322
    Flashlight     As required    
8F-9866     Grease Gun     For lubricating bearings    
1S-0258     Plastic Hammer As     Soft-faced    
4C-6477     Lamp, Fluorescent     Safety light    
1U-7230     Hand Tool Gp     Screwdrivers both Phillips and standard, sized as required    
1U-7248     Wrench     Adjustable, 12 inch    
8T-9293     Wrench     Torque, 40 to 250 ft-lb, 1/2 inch drive    
293-3025     Wrench Set     Allen, .05 to 3/8 inch    
214-1151     Socket Set     Nine pieces, 3/8 to 7/8 inch with 3/8 inch drive    
214-6498     Socket Set     Twelve pieces, 7/16 to 1 1/8 inch with 1/2 inch drive    
199-9019     Socket Set     Twelve pieces, 8 to 19 mm with 3/8 inch drive    
194-3576     Socket Set     Ten pieces, 16 to 26 mm with 1/2 inch drive    
4C-9600     Wrench Set     Eleven pieces, combination wrench sized 3/8 to 1 inch (standard)    
N/A     Vacuum     Electric with nonmetallic nozzle    
        MATERIALS    
1U-8809     Rust Preventative     Corrosion inhibitor (Rust preventative)    
1U-8803     Detergent     As required for cleaning, Hydrosolv 67    
4C-5522     Gloves     Chemical-resistant Nitrile Gloves    
N/A     Plastic     Protection for long-term storage    
N/A     Rags     As required    
N/A     Water     For cleaning    
N/A     Air     Compressed, dry    
N/A     Covering material     Waterproof desiccant bags, for