8C9187 SEAL-U-CUP Caterpillar parts
350, 350 L, 365B, 375, 375 L, 385B, P16
Rating:
Alternative (cross code) number:
CA8C9187
8C-9187
8C9187
CA8C9187
8C-9187
8C9187
Weight: 0.08 pounds 0 kg.
EXCAVATOR, PULVERIZER,
Compatible equipment models: 8C9187:
Number on catalog scheme:
12
For full view, you need register
Information:
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Illustration 1 g02494121
Typical example
Perform the following procedure in order to inspect the engine oil cooler.
Place a container under the oil cooler in order to collect any engine oil or coolant that drains from the oil cooler.
Refer to Disassembly and Assembly, "Engine Oil Cooler - Remove" for removal of the engine oil cooler.
Thoroughly clean the oil cooler (1) and the cylinder block.
Personal injury can result from air pressure.Personal injury can result without following proper procedure. When using pressure air, wear a protective face shield and protective clothing.Maximum air pressure at the nozzle must be less than 205 kPa (30 psi) for cleaning purposes.
Inspect the oil cooler (1) for cracks and dents. Replace the oil cooler (1) if cracks or dents exist. Ensure that no restrictions for the flow of lubricating oil exist in the oil cooler (1). Dry the oil cooler (1) with low-pressure air. Flush the inside of the oil cooler (1) with clean lubricating oil.
Refer to Disassembly and Assembly, "Engine Oil Cooler - Install" for installation of the engine oil cooler.
Ensure that the lubrication and the cooling system of the engine is filled to the correct level. Operate the engine. Note: Refer to Operation and Maintenance Manual, "Refill Capacities" for additional information.Check for oil or coolant leakage.
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
345C, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C L, 390D, 390D L
345C, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 375, 375 L, 385B, 385C, 385C L, 390D, 390D L
350, 350 L, S25
350, 350 L, S25
385B, CR20
325B L, 330, 330 FM L, 330 L, 330B L, 350, 350 L, CR20, P16
365B, 365B II, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
365B, 365B II, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L
385B, 385C, 385C L, 390D, 390D L
328D LCR, 345B II, 345B L, 345C, 345C L, 345D L, 349E L, 349E L VG, 349F L, 350, 365B, 365B II, 365B L, E650
345B II, 345B L, 350, 365B, 365B II, 365B L
350, 350 L, 365B, 375, 375 L, P16
1650129
SEAL-O-RING
CR20, P16
CR20, P16
325B L, 330, 330 FM L, 330 L, 330B L, 350, 350 L, CR20, P16
385B, CR20
1711382
SEAL
CR20, P16
CR20, P16
1850081
SEAL-O-RING
H140CS
H140CS
1707103
SEAL-O-RING
MP15, S305, VHS-50, VT50
MP15, S305, VHS-50, VT50
1707102
SEAL AS
MP15, P215, P360, S305, S365B, VHC-30, VHP-30, VHS-50, VHS-60/3, VT30, VT50
MP15, P215, P360, S305, S365B, VHC-30, VHP-30, VHS-50, VHS-60/3, VT30, VT50
MP15, P215, P360, S305, S365B, VHC-30, VHP-30, VHS-50, VHS-60/3, VT30, VT50
1707098
SEAL-O-RING
MP15, P215, P360, S305, S365B, VHC-30, VHP-30, VHS-50, VHS-60/3, VT30, VT50
MP15, P215, P360, S305, S365B, VHC-30, VHP-30, VHS-50, VHS-60/3, VT30, VT50
1707097
SEAL AS
MP15, P215, P360, S305, S365B, VHC-30, VHP-30, VHS-50, VHS-60/3, VT30, VT50
MP15, P215, P360, S305, S365B, VHC-30, VHP-30, VHS-50, VHS-60/3, VT30, VT50
CTV30, CTV40, G320, GSH15, GSH15-60, GSH22B, GSH9, GSH9B, MP15, P215, P360, S305, S465, VHC-30, VHP-30, VHS-50, VRG30, VT30, VT50