SEAL-RING 8H2229 - Caterpillar

Illustration 1 g03106916
Rear view
Illustration 2 g03106917
Left side view
Table 1
Specification for 384-8033 Flywheel Housing Gp
Item Qty Part Specification Description
Before installation of the flywheel housing, inspect the front face of the flywheel housing and the rear face of the cylinder block. The components must be free of the following substances: oil, fuel, water, gasket adhesive, assembly compounds, and any other foreign materials.
1 4 9X-8875 Bolt Length of 1/2 inch diameter bolt is 88.90 mm (3.500 inch).
Torque to 135 20 N m (100 15 lb ft).
2 2 9M-7269 Bolt Length of 1/2 inch diameter bolt is 171.45 mm (6.750 inch).
Torque to 135 20 N m (100 15 lb ft).
3 6 9X-8873 Bolt Length of 1/2 inch diameter bolt is 57.15 mm (2.250 inch).
Torque to 135 20 N m (100 15 lb ft).
4 2 9S-1374 Bolt Length of 1/2 inch diameter bolt is 203.20 mm (8.000 inch).
Torque to 135 20 N m (100 15 lb ft).
5 16 1D-4590 Bolt Length of 5/8 inch diameter bolt is 120.65 mm (4.750 inch).
Torque to 270 40 N m (199 30 lb ft).
6 4 8S-9089 Bolt Length of 1/2 inch diameter bolt is 114.30 mm (4.500 inch).
Torque to 135 20 N m (100 15 lb ft).
7 - - Before assembly, apply blue Loctite High Flex GM to the surface of the gasket.