SEAL 8H5540 - Caterpillar

8H5540 SEAL Caterpillar parts 977H, D9E

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8H5540
8H-5540
8H5540

Buy SEAL 8H5540 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK LOADER, TRACK-TYPE TRACTOR,

Compatible equipment models: 8H5540:

TRACK LOADER 977H

TRACK-TYPE TRACTOR D9E Caterpillar

Number on catalog scheme: None

For full view, you need register

Information:

Illustration 1 g01066106
(6) Stator (7) Stator leads (8) Stator frameStator Winding Continuity Test
Connect the multimeter leads between each combination of two stator leads (7) : (A to B), (B to C) and (C to A). Make a note of each measurement.
The three measurements should be approximately 0.063 ohms.
Replace the stator (6) if any of the measurements are incorrect. If a measurement is too low, the stator (6) is shorted. If a measurement is too high, the stator (6) is open.Stator Winding Ground Test
Set the multimeter to the 20 M ohm resistance scale. Measure the resistance between each stator lead (7) and the stator frame (8) : (A to 8), (B to 8) and (C to 8) .
Each measurement should be greater than 100 K Ohms (0.100 M Ohms).
If any of the three measurements are low, the stator (6) is shorted to the stator frame (8). Replace the stator if a short is measured.