SEAL-OIL 8I4404 - Caterpillar

Adjust all mirrors as specified in the Operation and Maintenance Manual. Failure to heed this warning can lead to personal injury or death.
Slips and falls can result in personal injury. Use the machine's access systems when adjusting the mirrors. If the mirrors cannot be reached using the machine access systems follow the instructions found within the Operation and Maintenance Manual, "Mirror" in order to access the mirrors.
Note: Your machine may not be equipped with all of the mirrors that are described in this topic.
Illustration 1 g01625347
(1) Left Outside Mirror
(2) Right Outside Mirror
Illustration 2 g01625349
(3) Left Inside Mirror
(4) Right Inside Mirror Mirrors provide additional visibility around your machine. Make sure that the mirrors are in proper working condition and that the mirrors are clean. Adjust all mirrors at the beginning of each work period and adjust the mirrors when you change operators. The appropriate organization of the job site is also recommended in order to minimize hazards due to visibility. Refer to this Operation and Maintenance Manual, "Visibility Information" for more information about the mirrors.Modified Machines or machines that have additional equipment or attachments may influence your visibility. Mirror Adjustment
Park the machine on a level surface.
Lower the work tool to the ground.
Move the hydraulic lockout control to the LOCKED position. Refer to Operation and Maintenance Manual, "Operator Controls" for more information about the lockout control.
Stop the engine.
Adjust rear view mirrors in order to provide visibility behind the machine at a maximum distance of 30 m (98 ft) from the rear corners of the machine.Note: You may need to use hand tools in order to adjust certain types of mirrors.Left Outside Mirror (1)
Illustration 3 g01631656If equipped, adjust the left outside mirror (1) so that an area of at least 1 m (3.3 ft) from the rear of the machine can be seen from the operator seat.Right Outside Mirror (2)
Illustration 4 g01631673If equipped, adjust the right outside mirror (2) so that an area of at least 1 m (3.3 ft) from the side of the machine can be seen from the operator seat. Additionally, provide as much visibility to the rear as possible.Left Inside Mirror (3)
Illustration 5 g01631674If equipped, adjust the left inside mirror (3) so that an area of at least 1 m (3.3 ft) from the side of the machine can be seen from the operator seat. Additionally, provide as much visibility to the rear as possible.Right Inside Mirror (4)
Illustration 6 g01631675If equipped, adjust the right inside mirror (4) so that an area of at least 1 m (3.3 ft) from the side of the machine can be seen from the operator seat. Additionally, provide as much visibility to the rear as possible.Rear of Machine (If Equipped)
Illustration 7 g01954656Adjust the mirrors on the machine before you begin operation. Do not climb on the machine in order to adjust the mirrors. The rear mirror may be adjusted by raising the hood. You may also use a ladder in order to properly align the mirror.Use the following procedure in order to adjust the mirror on rear of the