SEAL-OIL 8I4558 - Caterpillar

Illustration 8 g01569394
Attach Tooling (A) and a suitable lifting device to hood support (13). The weight of hood support (13) and the air cleaner assembly is approximately 57 kg (125 lb).
Remove bolts (14). Repeat this step for the opposite side of the machine.
Use Tooling (A) and the suitable lifting device in order to remove hood support (13) and the air cleaner assembly.
Illustration 9 g01569477
Disconnect dual clamp strap (15). Disconnect harness assemblies (16) .
Illustration 10 g01569481
Loosen clamp (17). Disconnect hoses (18). Remove bolt (19). Remove clips (20).
Illustration 11 g01569533
Remove nuts (21) .
Illustration 12 g01569553
Remove bolt (22). Disconnect ground strap (23) and cable assembly (24). Remove bolt (25) .
Illustration 13 g01569974
Remove nut (26). Position hoses (27) out of the way. Remove bolts (29). Position cable assemblies (28) out of the way.
Illustration 14 g01571053
Remove foot support assemblies (30). Remove floor mat (31) .
Illustration 15 g01571154
Remove plate assembly (32) .
Illustration 16 g01571173
Disconnect harness assembly (33). Remove bolts (34). Cut cable straps (35) that secure harness assembly (33) to the engine.
Illustration 17 g01571206
Disconnect harness assembly (36). Disconnect harness assemblies (38). Remove bolts (37) .
Illustration 18 g01571395
Attach Tooling (B) and a suitable lifting device to engine (39). The weight of engine (39) is approximately 778 kg (1715 lb).
Illustration 19 g01571473
Use Tooling (C) and suitable cribbing in order to support pumps (40) (not shown).
Illustration 20 g01571573
Remove bolts (41) .
Illustration 21 g01571598
Remove bolt (42) from the front engine mount. Repeat Step 22 for the other side of the engine.
Illustration 22 g01571395
Use Tooling (B) and the suitable lifting device in order to remove engine (39) .