SEAL 8M8594 - Caterpillar

Illustration 16 g00875538
Remove slide (39), rods (40), and bearings (41).
Illustration 17 g00875539
Remove bearing races (42).
Illustration 18 g00875564
Remove plug assembly (44) and joint pin (43).
Repeat Step 25 for the opposite side.
Illustration 19 g00875567
Remove bolts (45) and servo valve (46).
Illustration 20 g00875568
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Use Tooling (A) and a suitable press to remove retaining ring (47).
Illustration 21 g00875569
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Use Tooling (C) and a suitable press to remove ring assembly (48).
Illustration 22 g00875570
Remove spring retainer (49). Remove springs (50), (51), and (52). Remove spring retainer (53).
Illustration 23 g01855153Note: Measure nut (54) for installation.
Remove nut (54) and cover (55). Remove O-ring seal (56) (not shown).
Illustration 24 g00875599
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Use Tooling (A) and a suitable press to remove retaining ring (57).
Illustration 25 g00875601
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove O-ring seal (58) and ring assembly (59). Remove spring retainer (60). Remove springs (61), (62), and (64). Remove spring retainer (63) and rod (65).
Illustration 26 g01855135
Remove bolts (66) and cover (67).
Remove O-ring seal (68) (not shown).
Illustration 27 g00877519
Remove guide ring (69) and ring (70).