SEAL AS 8P8796 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 138-7575 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01386630
Attach Tooling (B) and a suitable lifting device to oil filter base (1). The weight of oil filter base (1) is approximately 39 kg (86 lb). Lift oil filter base (1) into position. Install bolts (2) that hold oil filter base (1) to the engine.
Install bolts (2) and (4) with the washers.
Position the gaskets and adapter (10) and install the bolts. Position tube assembly (6) and install bolts (5) with the retainers.
Position tube assembly (8) and install the clamp assembly with bolts (7), the washers, and the nuts.
Ensure that the mounting surface for the oil filters is clean. Apply clean engine oil to the seals of the filters. Install filters (9) according to the instructions that are shown on the filters. Do not overtighten the filters.
Place the clips for the harness assembly into position. Install the bolts into the clips.
Fill the engine with oil. Refer to the Operation and Maintenance Manual, "Refill Capacities".