SEAL 8R9207 - Caterpillar

2N2385 24V or 32V (Delco-Remy Number 1115524)Current pull in windings at 9 V ... 5.5 to 6.3 ACurrent pull in windings at 20 to 24 V ... 12.2 to 16.8 ACurrent hold in windings at 20 to 24 V ... .45 A(1) Torque for terminal nuts ... 14 3 lb. in.(1.6 0.3 N m)(2) 5L8983 Spring for plunger: length under test force ... 1.25 in.(31.8 mm)Test force ... 2.00 lb.(8.9 N)Free length after test ... 2.25 in.(57.2 mm)Outside diameter ... 1.75 in.(44.5 mm)(3) Distance between shaft and plate:* 3N548 Shaft ... .70 in.(17.8 mm)(4) Distance of plunger travel [start with dimension of .44 in. (11.2 mm) at (5)] ... .62 in.(15.7 mm)*On engine a test can show need for more adjustment. Hold in test on engine must take less than 2 A. 3L2871 24V or 32V (Delco-Remy Number 1119817)Current pull in windings at 20 V ... 3.9 to 4.2 ACurrent pull in windings at 20 to 24 V ... 3.9 to 5.1 ACurrent hold in windings at 20 to 24 V ... .5 A(1) Torque for terminal nuts ... 14 3 lb. in.(1.6 0.3 N m)(2) Distance from face of solenoid to center of hole in link when plunger is .75 in. (19.1 mm) from face of solenoid ... 6.12 in.(155.4 mm)(3) Travel of plunger [starting from a point .75 in. (19.1 mm) from face of solenoid] ... .50 in.(12.7 mm)(4) Distance from face of plunger to face of solenoid ... .75 in.(19.1 mm)