8T7287 SEAL-FACE Caterpillar parts
637E, 657E, D10N, D9N
Rating:
Alternative (cross code) number:
CA8T7287
8T-7287
8T7287
CA8T7287
8T-7287
8T7287
Weight: 0.01 pounds 0 kg.
TRACK-TYPE TRACTOR, WHEEL TRACTOR,
Compatible equipment models: 8T7287:
Number on catalog scheme:
39
For full view, you need register
Information:
3204, 3304B, 3306B And 3400 Series Engines Equipped With New Scroll Fuel System (NSFS)A piston-type fuel pump is used on the above engines. This type of fuel pump can cause rapid fluctuation of the indicator in some fuel pressure gauges.
Only mechanical fuel pressure gauges are affected. Electric fuel gauges are electrically dampened.The addition of an orificed fitting or snubber (flexible fuel lines are also recommended) can eliminate the erratic operation of the indicator in the fuel pressure gauge.
Two orificed fittings, the 6V8090 and 5P4837 Orificed Pipe Adapters, are available for use on the fuel pressure gauge lines of the above engines. The two fittings are different lengths, but both have an orifice dimension of 0.80 mm (.031"). The correct orificed fitting can be installed on either or both ends of the fuel pressure gauge line. The fittings are less than one inch long and have 1/8" NPT.
The above orificed fittings may not control the fluctuation of some non-dampened fuel gauge indicators. In these cases install a 7S3795 Snubber.
Only mechanical fuel pressure gauges are affected. Electric fuel gauges are electrically dampened.The addition of an orificed fitting or snubber (flexible fuel lines are also recommended) can eliminate the erratic operation of the indicator in the fuel pressure gauge.
Two orificed fittings, the 6V8090 and 5P4837 Orificed Pipe Adapters, are available for use on the fuel pressure gauge lines of the above engines. The two fittings are different lengths, but both have an orifice dimension of 0.80 mm (.031"). The correct orificed fitting can be installed on either or both ends of the fuel pressure gauge line. The fittings are less than one inch long and have 1/8" NPT.
The above orificed fittings may not control the fluctuation of some non-dampened fuel gauge indicators. In these cases install a 7S3795 Snubber.
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
24H, 5110B, 992C, 992D, D10N, D10R, D9L, D9R
824G, 824G II, 824H, 992C, 992D, 994, 994D, 994F, 994H, D10N, D10R, D10T, D10T2, D9L, R1600, R1600G, R1600H, R1700 II, R1700G, R2900, R2900G, R3000H
AP-1055B, AP-655C, AP-655D, AP1055E, BG-2455D, BG1055E, BG655D, D10N, D10R, D10T, D10T2, D11R, D11T
D8L, D9N, D9R, D9T
D8L, D9N, D9R, D9T
D10N, D10R, D10T, D10T2, D8L, D9L, D9N, D9R, D9T
D10N, D10R, D9R
D10N, D10R, D10T, D10T2, D9L
D10N, D8L, D9N
D10N, D10R, D8L, D9L, D9N, D9R
D10N
D9N
631C, 631E, 633C, 637D, 637E, 639D, 641, 657B, 657E, 666, 772, 773, 773B
6V5721
SEAL-RING
621E, 623E, 627E, 631E, 637E, 651E, 657E
621E, 623E, 627E, 631E, 637E, 651E, 657E
8T3553
SEAL
651E, 657E
651E, 657E
8W9632
SEAL
651E, 657E
651E, 657E
5T5193
SEAL
637E, 651E, 657E
637E, 651E, 657E
6V7356
SEAL
627E, 637E, 651E, 657E
627E, 637E, 651E, 657E
621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633C, 633D, 633E II, 637D, 637E, ...
621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633C, 633D, 633E II, 637D, 637E, ...
657E, 824C, 826C, 834B, 980C, 988B, D44B, D550B
657E
631E, 631G, 633E II, 637E, 637G, 657E, 657G, 772B, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F
637E, 657E