8T9005 SEAL Caterpillar parts
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 303E CR, 304C CR, 305.5D, 305C CR, 305D CR, 511, 517, 521, 522, 527, 532, 533, 541, 543, 551, 552, 65, 65C, 75, 75C, 824G, 824G II, 825G, ...
Rating:
Alternative (cross code) number:
CA8T9005
8T-9005
8T9005
CA8T9005
8T-9005
8T9005
Weight: 0.01 pounds 0 kg.
Information:
MATERIAL
Polychloroprene (CR)
THICKNESS
6.35
mm
UNIT MEASURE
CM
WIDTH
9.52
mm
CHALLENGER, WHEEL LOADER,
Compatible equipment models: 8T9005:
Number on catalog scheme:
23
For full view, you need register
Information:
Removal Procedure
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Turn the fuel supply to the OFF position.
Illustration 1 g01334899
Typical example
Remove plastic tube assembly (7) from fuel transfer pump (2) .Note: If the tube assembly has quick fit connections, ensure that the connections are clean before the tube assembly is plugged.
Disconnect plastic tube assembly (5) from the outlet of fuel transfer pump (2) .Note: If the tube assembly has quick fit connections, ensure that the connections are clean before the tube assembly is plugged.
Remove connector (6) from fuel transfer pump (2) . Remove the O-ring seal from connector (6) .If necessary, remove connector (9) from fuel transfer pump (2) . Remove the O-ring seal from the connector (9) .
Remove tube assembly (8) for the fuel return from the fuel transfer pump and the cylinder head.Note: Disconnect the tube assembly at the fuel transfer pump first in order to drain the fuel from the cylinder head.
Remove tube assembly (4) for the engine oil supply from fuel injection pump (1) .
Plug or cap all open ports and tube assemblies immediately with new plugs or caps.
Use an allen wrench with a ball end in order to remove allen head screws (3) that secure the fuel transfer pump to fuel injection pump (1) .
Illustration 2 g01335043
Remove fuel transfer pump (2) from fuel injection pump (1) .Note: Do not remove dowels (10) from the fuel injection pump.
Illustration 3 g01335045
Remove O-ring seal (11) from fuel transfer pump (2) .
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Turn the fuel supply to the OFF position.
Illustration 1 g01334899
Typical example
Remove plastic tube assembly (7) from fuel transfer pump (2) .Note: If the tube assembly has quick fit connections, ensure that the connections are clean before the tube assembly is plugged.
Disconnect plastic tube assembly (5) from the outlet of fuel transfer pump (2) .Note: If the tube assembly has quick fit connections, ensure that the connections are clean before the tube assembly is plugged.
Remove connector (6) from fuel transfer pump (2) . Remove the O-ring seal from connector (6) .If necessary, remove connector (9) from fuel transfer pump (2) . Remove the O-ring seal from the connector (9) .
Remove tube assembly (8) for the fuel return from the fuel transfer pump and the cylinder head.Note: Disconnect the tube assembly at the fuel transfer pump first in order to drain the fuel from the cylinder head.
Remove tube assembly (4) for the engine oil supply from fuel injection pump (1) .
Plug or cap all open ports and tube assemblies immediately with new plugs or caps.
Use an allen wrench with a ball end in order to remove allen head screws (3) that secure the fuel transfer pump to fuel injection pump (1) .
Illustration 2 g01335043
Remove fuel transfer pump (2) from fuel injection pump (1) .Note: Do not remove dowels (10) from the fuel injection pump.
Illustration 3 g01335045
Remove O-ring seal (11) from fuel transfer pump (2) .
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
D10N, D10R, D10T, D10T2
D10R, D10T, D10T2
D11R, D11T
D10, D11N, D11R, D11T
D10, D11N, D11R, D11T
D11N, D11R, D11T
D10, D11N, D11R, D11T
D11N, D11R, D11T
824G, 824G II, 824H, 826G, 826G II, 826H, 844, 844H, 844K, D8L, D9N, D9R
D10R, D10T, D10T2, D9R, D9T
D10R, D10T
D9R, D9T
215, 215B, 215C, 215D, 216, 228, 236, 236B, 242B, 246C, 246D, 247, 247B, 248, 256C, 262C, 262C2, 267, 267B, 268B, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287, 287C, 287C2, 289C, 28...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H,...
6V2496
SEAL
120G, 12G, 130G, 140G, 16G, 307, 307B, 312, 315, 317, 322 FM L, 330, 330 L, 349E L HVG, 350, 375, 375 L, 5080, 517, 525B, 525C, 527, 535B, 535C, 545, 545C, 554, 574, 574B, 611, 613C II, 615C, 621F, 62...
120G, 12G, 130G, 140G, 16G, 307, 307B, 312, 315, 317, 322 FM L, 330, 330 L, 349E L HVG, 350, 375, 375 L, 5080, 517, 525B, 525C, 527, 535B, 535C, 545, 545C, 554, 574, 574B, 611, 613C II, 615C, 621F, 62...
0552122
SEAL
65C, 65E, 75, 75C, 75D, 75E, 85C, 85D, 85E, 95E
65C, 65E, 75, 75C, 75D, 75E, 85C, 85D, 85E, 95E
1674, 1676, 1693, 30/30, 3192, 3406, 3406B, 3408, 3408B, 3412, 3512, 3516, 508, 518, 518C, 528, 528B, 530B, 561C, 578, 611, 615, 615C, 621, 623, 627, 637D, 637E, 65, 657E, 65C, 65E, 69D, 7261, 7271, 7...
16, 515, 518, 518C, 525, 525B, 525C, 528, 528B, 530B, 535B, 535C, 54, 545, 545C, 55, 583H, 641, 65, 651, 65C, 65E, 666, 75C, 75D, 75E, 836, 85C, 85D, 85E, 910, 95E, D342, D342C, D343, D353C, D379, D5B...
8T3410
SEAL
215B, 215C, 215D, 225, 225D, 227, 229, 229D, 231D, 235, 235C, 235D, 245, 245B, 245D, 65, 65C, 65E, 75, 75C, 75D, 75E, 85C, 85D, 85E, 95E
215B, 215C, 215D, 225, 225D, 227, 229, 229D, 231D, 235, 235C, 235D, 245, 245B, 245D, 65, 65C, 65E, 75, 75C, 75D, 75E, 85C, 85D, 85E, 95E
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H, 16H NA, 245, 24H, 3406B, 3508, 3512, 3516, 3516B, 365C...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 242B, 242B3, 247, 247B, 247B3, 248, 257B, 257B3, 259B3, 267, 301.5, 302.5, 303.5, 304.5, 554, 564, 574B, 65C, 75C, 75D, 85C, 85D
416, 416D, 420D, 424D, 426, 428, 428D, 430D, 432D, 442D, 65C, 75C, 75D, 85C, 85D, 902, 906, 906H, 906H2, 907H, 907H2, 908, 908H, 908H2, 910K, 914K, 953C, 963C, 973C, D3G, D4G, D5G
1342827
SEAL
246C, 256C, 262C, 272C, 277C, 279C, 287C, 289C, 297C, 299C, 65C, 75C, 75D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F, 85C, 85D, 966M, 966M XE, 972M, 972M XE
246C, 256C, 262C, 272C, 277C, 279C, 287C, 289C, 297C, 299C, 65C, 75C, 75D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F, 85C, 85D, 966M, 966M XE, 972M, 972M XE
9U2962
SEAL-WINDOW
65C, 75C, 85C
65C, 75C, 85C