8T9457 SEAL-FACE Caterpillar parts
120G, 12G, 130G, 140G, 14G, 160G, 16G, 508, 65, 916
Rating:
Alternative (cross code) number:
CA8T9457
8T-9457
8T9457
CA8T9457
8T-9457
8T9457
Weight: 0.01 pounds 0 kg.
CHALLENGER, WHEEL SKIDDER,
Compatible equipment models: 8T9457:
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Disconnect batteries before performance of any service work.
Note: Before disconnecting the wires and electrical cables, mark the items for the proper connections in order to ensure correct assembly.
Illustration 1 g00597378
Disconnect the wires and electrical cables from solenoid (1) and starting motor (2). If the engine has two starting motors, disconnect the wires between the two solenoids and starting motors.
Attach a suitable hoist to the starting motor. The starting motor weighs approximately 30 kg (66 lb).
Remove three bolts (3). Remove the starting motor. Remove the gasket from the joint between the starting motor and the flywheel housing. Installation Procedure
Inspect the gasket for the joint between the starting motor and the flywheel housing. Obtain a new gasket, if necessary.
Attach a suitable hoist to the starting motor. The starting motor weighs approximately 30 kg (66 lb).
Illustration 2 g00597378
Place the gasket in the cover for the starting motor. Lift the starting motor onto the mounting position. Install three bolts (3).
Connect the wires and electrical cables to solenoid (1) and starting motor (2). If the engine has two starting motors, connect the wires between the two solenoids and starting motors.
Disconnect batteries before performance of any service work.
Note: Before disconnecting the wires and electrical cables, mark the items for the proper connections in order to ensure correct assembly.
Illustration 1 g00597378
Disconnect the wires and electrical cables from solenoid (1) and starting motor (2). If the engine has two starting motors, disconnect the wires between the two solenoids and starting motors.
Attach a suitable hoist to the starting motor. The starting motor weighs approximately 30 kg (66 lb).
Remove three bolts (3). Remove the starting motor. Remove the gasket from the joint between the starting motor and the flywheel housing. Installation Procedure
Inspect the gasket for the joint between the starting motor and the flywheel housing. Obtain a new gasket, if necessary.
Attach a suitable hoist to the starting motor. The starting motor weighs approximately 30 kg (66 lb).
Illustration 2 g00597378
Place the gasket in the cover for the starting motor. Lift the starting motor onto the mounting position. Install three bolts (3).
Connect the wires and electrical cables to solenoid (1) and starting motor (2). If the engine has two starting motors, connect the wires between the two solenoids and starting motors.
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
16G, 16H, 16H NA
14M, 16G, 16H, 16H NA, 16M
16G, 16H NA
16G, 16H, 16H NA, 16M
16G, 16H, 16H NA, 16M
12G, 130G, 140, 140B, 140G, 14E, 14G, 16G
120G, 12G, 14G, 16G
14G, 16G
14G
16G
14G
130G
572G, 65, 973, 973C, 973D, 977K, 983B, D11N, D11R, D11T, D7G, D7G2, D8K, D9R
235, 245, 65, 75, 834B, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930G, 988B, 988F II, 992, 992C, 992D, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D6H, D6H II, D7E, D7E LGP, D7F, D...
5G9710
SEAL
65
65
7T7451
SEAL
416, 426, 428
416, 426, 428
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, ...
416, 426, 428, 436
1U4020
SEAL-RING
436
436
5G7069
SEAL
65, 75
65, 75
5G7068
SEAL
65, 75
65, 75
120G, 130G, 140G, 16G, 215, 235, 245, 3208, 3304, 3306, 3306B, 3406, 3406B, 3408, 3412, 3508, 3512, 3516, 518, 561C, 572G, 589, 613, 613B, 613C, 627E, 631E, 637E, 651E, 657E, 7241, 815B, 824G, 824G II...
120G, 12G, 130G, 140G, 14G, 160G, 16G, 508, 65, 916