8U0537 SEAL Caterpillar parts
206, 212, 214B, 224B
Rating:
Alternative (cross code) number:
CA8U0537
8U-0537
8U0537
CA8U0537
8U-0537
8U0537
Weight: 0.02 pounds 0 kg.
EXCAVATOR,
Number on catalog scheme:
18
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Turn the fuel supply to the OFF position.
Drain the fuel filter housing into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Fuel System Secondary Filter - Replace".
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining and filling procedures.
Illustration 1 g01963734
Disconnect tube assembly (1). Remove the O-ring seal from tube assembly (1).
Illustration 2 g01963736
Disconnect tube assembly (2).
Disconnect tube assembly (5) and tube assembly (6).
Attach a suitable lifting device onto fuel filter housing (3). The weight of fuel filter housing (3) is approximately 30 kg (66 lb).
Remove bolts (4) and fuel filter housing (3).
Illustration 3 g01963779
Remove bolts (9).
Remove cover (7) and O-ring seal (8) from fuel filter housing (3).
Illustration 4 g01963780
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts (11), cover (14), and O-ring seal (10) from fuel filter housing (3).
Remove spring (13) and retainer (12).
Remove the filter elements from fuel filter housing (3). Installation Procedure
Install fuel filter housing (3) in the reverse order of removal.
Prime the fuel system. Refer to Operation and Maintenance Manual, "Fuel System - Prime".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Turn the fuel supply to the OFF position.
Drain the fuel filter housing into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Fuel System Secondary Filter - Replace".
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining and filling procedures.
Illustration 1 g01963734
Disconnect tube assembly (1). Remove the O-ring seal from tube assembly (1).
Illustration 2 g01963736
Disconnect tube assembly (2).
Disconnect tube assembly (5) and tube assembly (6).
Attach a suitable lifting device onto fuel filter housing (3). The weight of fuel filter housing (3) is approximately 30 kg (66 lb).
Remove bolts (4) and fuel filter housing (3).
Illustration 3 g01963779
Remove bolts (9).
Remove cover (7) and O-ring seal (8) from fuel filter housing (3).
Illustration 4 g01963780
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts (11), cover (14), and O-ring seal (10) from fuel filter housing (3).
Remove spring (13) and retainer (12).
Remove the filter elements from fuel filter housing (3). Installation Procedure
Install fuel filter housing (3) in the reverse order of removal.
Prime the fuel system. Refer to Operation and Maintenance Manual, "Fuel System - Prime".
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
120, 120B, 120H, 120H ES, 120H NA, 129, 12E, 12F, 12H, 135H, 135H NA, 140, 140B, 140G, 140H, 140H NA, 141, 143H, 14E, 153, 16, 160H, 163, 1673C, 1693, 16G, 172, 173B, 183, 183B, 191, 193, 205B, 214B, ...
214B, 224B, 3116, 3176, 3176B, 320 L, 325, 75, 950F, AP-1000, AP-1050, CP-563, E240C
120H, 120H ES, 120H NA, 135H, 135H NA, 206B, 211B, 213B, 214B, 3114, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 3304, 3306, 3406B, 3406C, 35, 446B, 446D, 45, 525B, 533, 535B,...
10 FT, 10-20B, 120, 120B, 120G, 120H, 120H ES, 120H NA, 12E, 12F, 12G, 130G, 135H, 135H NA, 140, 140B, 140G, 141, 14E, 14G, 14H, 14H NA, 153, 16, 160G, 163, 1673, 1673B, 1674, 16G, 16H, 16H NA, 172, 1...
120H, 120H ES, 120H NA, 135H, 135H NA, 14M, 16M, 214B, 30/30, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 374F L, 390F L, 446B, 446D, 45, 525B, 533, 535B, 539...
120H, 120H ES, 120H NA, 135H, 135H NA, 140H, 143H, 14H, 160H, 163H, 16G, 16H, 16H NA, 205B, 211B, 213B, 214B, 216, 224B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 3176, 3176B, 3176C, 3196, 320 L, 320B, 3...
120H, 120H ES, 120H NA, 135H, 135H NA, 211B, 214B, 3114, 3116, 3126, 320B, 322, 322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325B, 325B L, 3406, 3406B, 3406C, 3406E, 35, 446, 446B, 446D, 45, 525B, 533,...
118, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14E, 14G, 14H, 14H NA, 16, 160G, 160H, ...
206, 206B, 212, 212B, 214B, 216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3, 2864C, 586C, M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318D, M318D MH
206, 206B, 212, 212B
206, 206B, 212, 212B, M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH, M325C MH, M325D L MH, M325D MH, M330D
206B, 212B, 214B, 224B, 550, 550B, 560B, 570, 570B, 580, 580B, HH45, HH55, HH65, HH75, M312, M313C, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C, M325C MH, M325D L MH, M325D MH
5W5495
SEAL-O-RING
206, 212, 214B, 224B
206, 212, 214B, 224B
5W8383
SEAL
206, 212, 214B, 224B
206, 212, 214B, 224B
5W5487
SEAL
206, 212, 214B, 224B, MH3037, MH3049, MH3059
206, 212, 214B, 224B, MH3037, MH3049, MH3059
5W5650
SEAL-O-RING
206, 212, 214B, 224B
206, 212, 214B, 224B
8U0536
SEAL
206, 212, 214B, 224B
206, 212, 214B, 224B
8U0764
SEAL
206, 214B, 224B
206, 214B, 224B
205, 205B, 206, 206B, 211B, 212, 212B, 214B, 224B
5W9533
SEAL-O-RING
205, 206, 206B, 212, 212B, 214B, 224B
205, 206, 206B, 212, 212B, 214B, 224B
5W5496
SEAL-O-RING
214B, 224B
214B, 224B
5W5493
SEAL-O-RING
206, 212, 214B, 224B
206, 212, 214B, 224B
8U0534
SEAL
206, 212, 214B, 224B
206, 212, 214B, 224B
5W5494
SEAL-O-RING
206, 212, 214B, 224B
206, 212, 214B, 224B