8U2522 SEAL-O-RING Caterpillar parts
213B, 214B, 224B, H55DS, M318, M320
Rating:
Alternative (cross code) number:
CA8U2522
8U-2522
8U2522
CA8U2522
8U-2522
8U2522
Weight: 0.01 pounds 0 kg.
Information:
CROSS SECTION DIAMETER
2.65
mm
ID
88.57
mm
MATERIAL
Nitrile (NBR) Rubber 90 Duro
OD
0
mm
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 8U2522:
Number on catalog scheme:
10
For full view, you need register
Information:
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01434456
Use two people in order to install axle oil cooler (6). The weight of axle oil cooler (6) is approximately 27 kg (60 lb). Position axle oil cooler (6) and install bolts (5).
Connect hose assemblies (7).
Illustration 2 g01434450
Install plate assembly (4).
Illustration 3 g01434446
Install plate assemblies (3). Install panel assembly (2).
Illustration 4 g01433075
Close grill assembly (1). Repeat for the opposite side.
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01434456
Use two people in order to install axle oil cooler (6). The weight of axle oil cooler (6) is approximately 27 kg (60 lb). Position axle oil cooler (6) and install bolts (5).
Connect hose assemblies (7).
Illustration 2 g01434450
Install plate assembly (4).
Illustration 3 g01434446
Install plate assemblies (3). Install panel assembly (2).
Illustration 4 g01433075
Close grill assembly (1). Repeat for the opposite side.
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
120H, 120H ES, 120H NA, 12H, 135H, 135H NA, 140, 140B, 140M, 14E, 16, 163, 172, 183, 183B, 191, 193, 205B, 214B, 215, 225, 235, 245, 30/30, 3056E, 3114, 3116, 3126, 3126B, 3126E, 315C, 318C, 319C, 320...
140H, 143H, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 1673C, 205B, 206B, 211B, 212B, 215, 235B, 235C, 24M, 3204, 325D L, 330, 330 FM L, 3304, 3304B, 3306, 3306B, 3306C, 330B L, 3406, 3406B, 3406E, 3408...
120B, 120G, 12F, 12G, 12H, 12H ES, 12H NA, 130G, 140, 140B, 140G, 140H, 140H ES, 140H NA, 141, 143H, 14E, 14G, 14H, 14H NA, 153, 16, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA, 1673C, 16G, 16H, 16H N...
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14E, 14G, 14H, 14H NA, 153, 16, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, ...
120M, 120M 2, 12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD, 216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 242B, 242B3, 247B, 247B3, 252B, 252B3, 257B, 257B3, 259B3, 267, 287, 31...
3208, 320D FM, 345B II, 3512C, 3516B, 3516C, 5130B, 522B, 532, 533, 543, 551, 552, 552 2, 554, 564, 574, 574B, 735, 740, 777G, 785D, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ,...
205B, 206B, 211B, 212B, 213B, 214B, 224B, 416E, 416F, 420F, 422F, 428F, 430F, 434F, 518C, M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH...
214B, 3114, 3116, CB-434, E200B
312B L, 315C, 315D L, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320D, 320D FM, 320D FM RR, 320D2, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 322C, 323D L, 323D LN, 323D SA, 323E L, 3...
906H, 906H2, 907H, 907H2, 908H, 908H2, CB-434D, CB-534D, CB-54, CB-564D, CB-634D, CB-64, CD-54, CP-56, CP-573E, CP-64, CP-663E, CP-74B, CP-76, CS-531D, CS-533D, CS-56, CS-563D, CS-563E, CS-573D, CS-58...
1609539
SEAL-O-RING
365B, 365B L, 365C, 365C L, 5110B, 5230, 5230B, 623E, 623F, 623G, 793C, 797, 797B, 797F, M312, M313C, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C
365B, 365B L, 365C, 365C L, 5110B, 5230, 5230B, 623E, 623F, 623G, 793C, 797, 797B, 797F, M312, M313C, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C
M312, M315, M318, M320
307B, M312, M313C, M313D, M315, M315C, M315D, M316C, M316D, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH
8U2744
SEAL
205B, 206B, 211B, 212B, 213B, 214B, 224B, M312, M315, M315D 2, M317D 2, M318, M320, M322C
205B, 206B, 211B, 212B, 213B, 214B, 224B, M312, M315, M315D 2, M317D 2, M318, M320, M322C
8U2743
SEAL-O-RING
205B, 206B, 211B, 212B, 213B, 214B, 224B, M312, M315, M315D 2, M317D 2, M318, M320, M322C
205B, 206B, 211B, 212B, 213B, 214B, 224B, M312, M315, M315D 2, M317D 2, M318, M320, M322C
584, 735, 735B, 740, 740B, 770G, 772G, 777F, 777G, 793F, 793F CMD, 793F OEM, 793F-XQ, 797, 797B, 824K, 825K, 826K, D350E II, D400E II, D6T, D6T LGP, D6T LGPPAT, D6T XL, M312, M313C, M313D, M315, M315C...
M312, M315, M318, M320, M325C MH, M325D L MH, M330D, PC310B, SW345B
8U5490
SEAL-O-RING
205B, 206B, 211B, 212B, M312, M315, M318, M320, TK1051
205B, 206B, 211B, 212B, M312, M315, M318, M320, TK1051
1739942
SEAL
M312, M315, M318, M320
M312, M315, M318, M320
1739941
SEAL
M312, M313D, M315, M315D, M316D, M318, M318C, M318D, M318D MH, M320, M322C, M322D, M322D MH
M312, M313D, M315, M315D, M316D, M318, M318C, M318D, M318D MH, M320, M322C, M322D, M322D MH
8U2524
SEAL
213B, 214B, 224B, 539, M318, M320
213B, 214B, 224B, 539, M318, M320