SEAL-LIP 8U9262 - Caterpillar

Connection Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A         Screw Pin Anchor Shackle 5/8 inch pin     2    
B     138-7574     Link Bracket     4    
Illustration 1 g00593716
Illustration 2 g00593717
Attach Tooling (A) to output transfer gear case (1). Position a suitable lifting device to Tooling (A). Secure the suitable lifting device to a hoist.
Attach Tooling (B) to transmission (2). Position a suitable lifting device to Tooling (B). Secure the suitable lifting device to a hoist.
Position transmission (2) and the O-ring seal to output transfer gear case (1). The weight of transmission (2) is 1279 kg (2820 lb). The weight of output transfer gear case (1) is 1783 kg (3930 lb).
Install nine bolts (9), six nuts (10), and the hard washers that secure transmission (2) to output transfer gear case (1) .
Position block (4), the seal, and the hose assembly to transmission (2). Install four bolts (3) that secure block (4), the seal, and the hose assembly to transmission (2) .
Connect hose assembly (5) to the manifold on the top of transmission (2) .
Illustration 3 g00593715
Tighten two bolts (8) that secure drain tube assembly (7) to output transfer gear case (1) .
Install four bolts (6) that secure drain tube assembly (7) to transmission (2) .End By: Install the transmission and output transfer gear and case. Refer to Disassembly and Assembly, "Transmission and Output Transfer Gear and Case - Install".