SEAL 9D0384 - Caterpillar

Articulated Truck AllAsphalt Paver AllBackhoe Loader AllChallenger AllCold Planer AllCombine AllCompact Wheel Loader AllEarthmoving Compactor AllExcavator AllForest Products AllIntegrated Toolcarrier AllLandfill Compactor AllLoad Haul Dump AllMaterial Handler AllMini Hydraulic Excavator AllMotor Grader AllMulti Terrain Loader AllOff-Highway Truck/Tractor AllPaving Compactor AllPipelayer AllPneumatic CompactorCW12 (S/N: RHJ1-UP)CW34 (S/N: 3G41-UP)Pumper All Utility MountedRoad Reclaimer/Soil Stabilizer AllSkid Steer Loader AllSoil Compactor AllTrack-Type Loader AllTrack-Type Skidder AllTrack-Type Tractor AllUnderground Articulated Truck AllVibratory Soil Compactor AllWheel Dozer AllWheel Feller Buncher AllWheel Loader AllWheel Skidder AllWheel Tractor-Scraper AllWheeled Excavator AllWork Tool AllIntroduction
Table 1
Revision Summary of Changes in SEBF8147
13 Added Prefixes to Group effectivity, added more effectivity to doc
12 Updated Group Effectivity
11 Updated Group Effectivity
10 Updated Group Effectivity
09 Updated Group Effectivity © 2018 Caterpillar All Rights Reserved. This guideline is for the use of Cat dealers only. Unauthorized use of this document or the proprietary processes therein without permission may be violation of intellectual property law.Information contained in this document is considered Caterpillar: Confidential Yellow.This Reuse and Salvage Guideline contains the necessary information to allow a dealer to establish a parts reusability program. Reuse and salvage information enables Caterpillar dealers and customers to benefit from cost reductions. Every effort has been made to provide the most current information that is known to Caterpillar. Continuing improvement and advancement of product design might have caused changes to your product which are not included in this publication. This Reuse and Salvage Guideline must be used with the latest technical information that is available from Caterpillar.For technical questions when using this document, work with your Dealer Technical Communicator (TC).To report suspected errors, inaccuracies, or suggestions regarding the document, submit a form for feedback in the Service Information System (SIS Web) interface.Summary
Many machines and components are built using tubes that are installed by a mechanical process of “rolling” (expanding) the end of the tube into the bore in which tube is installed. Special tools are required to roll (expand) these tubes in place. Sometimes these tubes are damaged or fail and require replacement. Since these tubes are installed in one piece, tubes frequently must be installed in sequence. Often there are several tubes installed in the same component. Also, the only way to remove a tube is to cut out tube, thus destroying tube. Each end of the same tube may also require different tooling (expanders) to install tube in the housing.The tube rolling process requires access from both sides of the housing. Access from the inside is required to install the tube in the housing. Outside access is required to toll the tubes in place. Often, major components such as fuel tanks and final drives, must be removed to access the outside of the housing.Important Safety Information
Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person should also have the necessary training, skills, and