SEAL-O-RING 9M4218 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     -     Loctite 595     -    
B     1P-0808     Multipurpose Grease     -    
C     -     Guide Stud
(3/8 - 16 x 5 inch)     4    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the sealing surfaces of the engine oil pan and the cylinder block.
Illustration 1 g01123600
Apply Tooling (A) to oil pan gasket (4) . Install the oil pan gasket on the engine oil pan. Install Tooling (C) in the engine oil pan.
Apply Tooling (B) to the bore of flange (7) . Install seal (8) inside flange (7) . Position the flange and install bolts (6) . Install O-ring seal (5) on the flange.
Improper lift rigging can allow unit to tumble causing injury and damage.
Illustration 2 g01123599
Attach a suitable lifting device to the engine lifting eyes.
The weight of the 3508B Engine is approximately 4445 kg (9800 lb). The weight of the oil pan is approximately 240 kg (530 lb).
The weight of the 3512B Engine is approximately 5900 kg (13,000 lb). The weight of the oil pan is approximately 295 kg (650 lb).
The weight of the 3516B Engine is approximately 7711 kg (17,000 lb). The weight of the oil pan is approximately 409 kg (900 lb).
Lift the engine. Place the engine onto the engine oil pan.
Illustration 3 g01123597
Install bolts (3) . Remove Tooling (C) from engine oil pan (2) and install the remaining bolts (3) .
Illustration 4 g01123595
Install bolts (1) that hold the connector for the oil pump to engine oil pan (2) .
Fill the engine oil pan to the correct level that is indicated on the engine oil level gauge. For the proper procedure and engine oil to use, see the Operation and Maintenance Manual.