SEAL GP-DUO-CONE 9W2625 - Caterpillar

Illustration 5 g06245268
Battery
The operator console comes with 3.7 VDC Li-Ion Rechargeable Batteries and a 12V battery charger. An optional 120V charger is available.
Illustration 6 g03673059
Bottom of operator console
(2) Battery location
(3) RFID chip slot locationThe battery is inserted into the bottom of the operator console.Low Battery Warning
Battery capacity indicator will show no more bars remaining and change color to red when approximately 10 percent capacity remains. With a new battery the red indicator means approximately 2.5 hours of operational time remains.When approximately 4 minutes of operational time remain, a critical battery alarm activates consisting of:
The battery LED flashing red
An audible alarm
The LCD displaying "Low Battery Warning" across the entire screenNormal LCD functionality will be lost but the controls will still function during a critical battery alarm activation.Radio Frequency Identification (RFID) Chip
Illustration 7 g06245297
RFID chip
The Console is modular and can be used with multiple Transceivers. The On-Board Transceiver is shipped with a Radio Frequency Identification (RFID) chip that is matched to the Transceiver. The RFID chip is matched specifically to the Transceiver the RFID chip is shipped with. The RFID chip cannot be used to operate any other machines except for the one with the matched Transceiver mounted. The serial number listed on the RFID chip matches that of the matched Transceiver. To use the console with another Transceiver, the Radio Frequency Identification (RFID) Chip must be removed. A new RFID chip (from the pair Transceiver) should be installed. The RFID chip can be removed from the console and put into a spare console to operate the machine if the need arises.Note: The paired RFID chip needs storage in a safe place. The replacement service part is ordered as a Kit and will include the RFID chip and Transceiver. The replacement service kit does not include the Antenna. the RFID chip and Transceiver are not sold separately.The Console will not operate without the proper RFID chip.Carry Case and Equipment
Illustration 8 g02947336
Carry case
The carry case is provided to be a safe storage and transportation tool for the operator console and related components.In addition to the operator console, storage space is provided for the receiver, antenna, batteries and charger, shoulder harness, and all service publications.The carry case is equipped with wheels and a retractable handle for ease of use.Operator Console Features and Machine Response
Operator Console Commanded Stop Switch
The Commanded Stop Switch will send a message from the Console to the Transceiver Radio. The Radio will then send a Stop CAN message to the RCM