SEAL GP-DUO CONE 9W6620 - Caterpillar

Note: Before performing any operation or maintenance procedures, ensure that the Safety Information, warnings, and instructions are read and understood. To determine the maintenance intervals, use service hours or calendar time, whichever occurs first .Before each consecutive interval is performed, all of the maintenance items from the previous interval must also be performed.When Required
Battery or Battery Cable - Disconnect
Engine Storage Procedure - Check
Fuel System - Prime
Daily
Cooling System Coolant Level - Check
Driven Equipment - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Walk-Around Inspection
Every 250 Service Hours or 6 Months
Alternator and Fan Belts - Inspect/Adjust/Replace
Battery Electrolyte Level - Check
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Air Cleaner Element (Dual Element) - Clean/Replace
Engine Oil Sample - Obtain
Fan Drive Bearing - Lubricate
Fuel Tank Water and Sediment - Drain
Radiator - Clean
Every 500 Service Hours or 1 Year
Engine Oil and Filter - Change
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel Transfer Pump Strainer - Clean
Glow Plugs - Inspect
Every 1000 Service Hours
Engine Crankcase Breather - Clean
Engine Valve Lash - Inspect/Adjust
Hoses and Clamps - Inspect/Replace
Every 2000 Service Hours
Alternator - Inspect
Engine Crankcase Breather - Replace
Engine Mounts - Inspect
Engine Protective Devices - Check
Starting Motor - Inspect
Turbocharger - Inspect
Every 3000 Service Hours
Cooling System Coolant (DEAC) - Change
Cooling System Coolant Extender (ELC) - Add
Cooling System Water Temperature Regulator - Replace
Fuel Injection Nozzles - Test/Exchange
Water Pump - Inspect
Every 6000 Service Hours
Cooling System Coolant (ELC) - Change
Engine - Clean
Overhaul
Overhaul Considerations