9X0934 SEAL-O-RING Caterpillar parts
CS-551
Rating:
Alternative (cross code) number:
CA9X0934
9X-0934
9X0934
CA9X0934
9X-0934
9X0934
Weight: 0.01 pounds 0 kg.
VIBRATORY COMPACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$2,588.12
27 Jul 2022
US: EFI Equipment a
Aftermarket replacement MCBC12011 Cat C12 Major Overhaul Gasket Set
Generic MCBC12011, 1292181, 2H3934, 6V3251, 6V-3251, 6V5048, 188-7535, 1887535, 6V-5048, 9X-0934, 9X0934, 6V6609, 6V-6609,
Generic MCBC12011, 1292181, 2H3934, 6V3251, 6V-3251, 6V5048, 188-7535, 1887535, 6V-5048, 9X-0934, 9X0934, 6V6609, 6V-6609,
$2,588.12
22 Jul 2022
US: # 1 Quality Par
Aftermarket replacement MCBC12011 Cat C12 Major Overhaul Gasket Set
Generic MCBC12011, 1292181, 2H3934, 6V3251, 6V-3251, 6V5048, 188-7535, 1887535, 6V-5048, 9X-0934, 9X0934, 6V6609, 6V-6609,
Generic MCBC12011, 1292181, 2H3934, 6V3251, 6V-3251, 6V5048, 188-7535, 1887535, 6V-5048, 9X-0934, 9X0934, 6V6609, 6V-6609,
Number on catalog scheme:
8
For full view, you need register
Compatible equipment models: 9X0934:
Information:
Action Required
See the attached procedure.
Service Claim Allowances
This is a 6-hour job. A maximum of $25.00 U.S. will be allowed for labor and material to fabricate the bracket assembly.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Attach.(1-Rework Procedure)Rework Procedure
REWORKING PRIMARY SHUT-OFF SWITCH MOUNTED ON THE LEFT HAND MODULE:
1. REMOVE AND DISCARD EXISTING ENGINE SHUT-OFF SWITCH AND HARDWARE FROM MODULE. KEEP (1) 3E-5169 SWITCH GUARD IF IN REUSABLE CONDITION.
2. FILL OR COVER HOLE IN FRAME SHOWN IN ILLUSTRATION 1.3. REMOVE EXISTING LADDER LAMP SWITCH FROM 108-7686 PLATE. THEN REMOVE PLATE AND HARDWARE FROM CURRENT LOCATION SHOWN ON ILLUSTRATION 1.4. ENLARGE EXISTING 120 MM DIAMETER HOLE TO 150X150 MM OPENING WITH R20 2 MM CORNERS AS SHOWN IN ILLUSTRATION 1 AND 2.5. FABRICATE (1) 111-4489 BRACKET AS. AS SHOWN IN ILLUSTRATION 10.6. INSTALL (1) 111-4489 BRACKET AS. AS SHOWN IN ILLUSTRATION 3.7. INSTALL (1) 112-6797 PLATE WITH (2) 8T-4137 BOLTS AND (2) 8T-4121 WASHER AS SHOWN IN ILLUSTRATION 4.8. REINSTALL THE LADDER LAMP SWITCH REMOVED IN STEP 3 AS SHOWN IN ILLUSTRATION 4.9. INSTALL (1) 108-8420 FILM ABOVE LADDER LAMP SWITCH.10. INSTALL (1) 130-6968 FILM ON LEFT SIDE OF 112-6797 PLATE.11. INSTALL (1) 4D-1836 SWITCH AND (1) 3E-5169 SWITCH GUARD TO 112-6797 PLATE AS SHOWN IN ILLUSTRATION 4.12. LOCATE THE THREE WIRES FORMERLY CONNECTED TO THE SHUT-OFF SWITCH (REMOVED IN STEP 1). CUTOFF THE CURRENT TERMINALS. INSTALL (3) 8T-8730 SOCKETS, (1) 3E-3367 PLUG AS., AND (1) 3E-3368 WEDGE. TERMINATE AS SHOWN IN ILLUSTRATION 5. (1) 102-8808 PLUG-KIT CONTAINS (1) 3E-3367 PLUG AS. AND (1) 3E-3368 WEDGE
13. CONNECT ONE END OF (1) 148-5471 TO REWORKED HARNESS FROM PREVIOUS STEP.14. CONNECT THE OTHER END OF THE 148-5471 HARNESS TO THE 4D-1836 (SHUT-OFF) SWITCH AS SHOWN IN ILLUSTRATION 4: 15. SECURE 148-5471 HARNESS TO EXISTING MAIN HARNESS BY USING (25) 3S-2093 STRAPS AND (15) 7K-1181 STRAPS. MACHINES THAT CURRENTLY HAVE A SECONDARY SHUT-OFF SWITCH MOUNTED ON THE ENGINE SHOULD ALSO PERFORM OPTION A. (5ZL51-124) MACHINES THAT CURRENTLY DO NOT HAVE A SECONDARY SHUT-OFF SWITCH MOUNTED ON THE ENGINE SHOULD ALSO PERFORM OPTION B (7TJ7, 5ZL21-50).
OPTION A - REWORKING SECONDARY SHUT-OFF SWITCH MOUNTED ON THE ENGINE:
1A. INSTALL (1) 147-5216 PLATE AND (4) 7T-1099 LINKS INTO LOCATION SHOWN ON ILLUSTRATION 6-8.2A. REMOVE AND DISCARD EXISTING SHUT-OFF SWITCH AND HARDWARE FROM ENGINE. KEEP (1) 3E-5169 SWITCH GUARD IF IN REUSABLE CONDITION.
3A. LOCATE THE THREE WIRES FORMERLY CONNECTED TO THE SHUT-OFF SWITCH. CUTOFF THE CURRENT RING TERMINALS. INSTALL (4) 8T-8730 SOCKETS, (1) 3E-3373 PLUG AS., AND (1) 3E-3374 WEDGE. TERMINATE AS SHOWN IN ILLUSTRATION 9. (1) 102-8809 PLUG-KIT CONTAINS (1) 3E-3373 PLUG AS. AND (1) 3E-3374 WEDGE
4A. INSTALL (1) 130-6968 FILM ON 147-5216 PLATE INSTALLED IN STEP 1.5A. INSTALL (1) 4D-1836 SWITCH AND (1) 3E-5169 GUARD.6A. CONNECT ONE END OF (1) 143-0073 HARNESS AS. TO REWORKED HARNESS FROM STEP 3.7A. CONNECT THE OTHER END OF THE 143-0073 HARNESS TO 4D-1836 (SHUT-OFF) SWITCH AS FOLLOWS: 8A. SECURE HARNESS USING (15) 3S-2093 STRAPS. OPTION B - REWORKING SECONDARY SHUT-OFF SWITCH MOUNTED ON THE
See the attached procedure.
Service Claim Allowances
This is a 6-hour job. A maximum of $25.00 U.S. will be allowed for labor and material to fabricate the bracket assembly.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Attach.(1-Rework Procedure)Rework Procedure
REWORKING PRIMARY SHUT-OFF SWITCH MOUNTED ON THE LEFT HAND MODULE:
1. REMOVE AND DISCARD EXISTING ENGINE SHUT-OFF SWITCH AND HARDWARE FROM MODULE. KEEP (1) 3E-5169 SWITCH GUARD IF IN REUSABLE CONDITION.
2. FILL OR COVER HOLE IN FRAME SHOWN IN ILLUSTRATION 1.3. REMOVE EXISTING LADDER LAMP SWITCH FROM 108-7686 PLATE. THEN REMOVE PLATE AND HARDWARE FROM CURRENT LOCATION SHOWN ON ILLUSTRATION 1.4. ENLARGE EXISTING 120 MM DIAMETER HOLE TO 150X150 MM OPENING WITH R20 2 MM CORNERS AS SHOWN IN ILLUSTRATION 1 AND 2.5. FABRICATE (1) 111-4489 BRACKET AS. AS SHOWN IN ILLUSTRATION 10.6. INSTALL (1) 111-4489 BRACKET AS. AS SHOWN IN ILLUSTRATION 3.7. INSTALL (1) 112-6797 PLATE WITH (2) 8T-4137 BOLTS AND (2) 8T-4121 WASHER AS SHOWN IN ILLUSTRATION 4.8. REINSTALL THE LADDER LAMP SWITCH REMOVED IN STEP 3 AS SHOWN IN ILLUSTRATION 4.9. INSTALL (1) 108-8420 FILM ABOVE LADDER LAMP SWITCH.10. INSTALL (1) 130-6968 FILM ON LEFT SIDE OF 112-6797 PLATE.11. INSTALL (1) 4D-1836 SWITCH AND (1) 3E-5169 SWITCH GUARD TO 112-6797 PLATE AS SHOWN IN ILLUSTRATION 4.12. LOCATE THE THREE WIRES FORMERLY CONNECTED TO THE SHUT-OFF SWITCH (REMOVED IN STEP 1). CUTOFF THE CURRENT TERMINALS. INSTALL (3) 8T-8730 SOCKETS, (1) 3E-3367 PLUG AS., AND (1) 3E-3368 WEDGE. TERMINATE AS SHOWN IN ILLUSTRATION 5. (1) 102-8808 PLUG-KIT CONTAINS (1) 3E-3367 PLUG AS. AND (1) 3E-3368 WEDGE
13. CONNECT ONE END OF (1) 148-5471 TO REWORKED HARNESS FROM PREVIOUS STEP.14. CONNECT THE OTHER END OF THE 148-5471 HARNESS TO THE 4D-1836 (SHUT-OFF) SWITCH AS SHOWN IN ILLUSTRATION 4: 15. SECURE 148-5471 HARNESS TO EXISTING MAIN HARNESS BY USING (25) 3S-2093 STRAPS AND (15) 7K-1181 STRAPS. MACHINES THAT CURRENTLY HAVE A SECONDARY SHUT-OFF SWITCH MOUNTED ON THE ENGINE SHOULD ALSO PERFORM OPTION A. (5ZL51-124) MACHINES THAT CURRENTLY DO NOT HAVE A SECONDARY SHUT-OFF SWITCH MOUNTED ON THE ENGINE SHOULD ALSO PERFORM OPTION B (7TJ7, 5ZL21-50).
OPTION A - REWORKING SECONDARY SHUT-OFF SWITCH MOUNTED ON THE ENGINE:
1A. INSTALL (1) 147-5216 PLATE AND (4) 7T-1099 LINKS INTO LOCATION SHOWN ON ILLUSTRATION 6-8.2A. REMOVE AND DISCARD EXISTING SHUT-OFF SWITCH AND HARDWARE FROM ENGINE. KEEP (1) 3E-5169 SWITCH GUARD IF IN REUSABLE CONDITION.
3A. LOCATE THE THREE WIRES FORMERLY CONNECTED TO THE SHUT-OFF SWITCH. CUTOFF THE CURRENT RING TERMINALS. INSTALL (4) 8T-8730 SOCKETS, (1) 3E-3373 PLUG AS., AND (1) 3E-3374 WEDGE. TERMINATE AS SHOWN IN ILLUSTRATION 9. (1) 102-8809 PLUG-KIT CONTAINS (1) 3E-3373 PLUG AS. AND (1) 3E-3374 WEDGE
4A. INSTALL (1) 130-6968 FILM ON 147-5216 PLATE INSTALLED IN STEP 1.5A. INSTALL (1) 4D-1836 SWITCH AND (1) 3E-5169 GUARD.6A. CONNECT ONE END OF (1) 143-0073 HARNESS AS. TO REWORKED HARNESS FROM STEP 3.7A. CONNECT THE OTHER END OF THE 143-0073 HARNESS TO 4D-1836 (SHUT-OFF) SWITCH AS FOLLOWS: 8A. SECURE HARNESS USING (15) 3S-2093 STRAPS. OPTION B - REWORKING SECONDARY SHUT-OFF SWITCH MOUNTED ON THE
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 211B, 214B, 215, 225, ...
120G, 12G, 12M 2, 130G, 140B, 140G, 140M 2, 14E, 14G, 16, 160M 2, 163, 1673C, 16G, 215, 225, 235, 2864C, 3114, 3116, 3126, 3126B, 3126E, 3160, 3176, 3208, 320B, 320N, 321B, 322B L, 322B LN, 325, 325 L...
1090, 1140, 1150, 1160, 1190, 1190T, 120G, 120M, 120M 2, 1290T, 12E, 12G, 12H, 12H ES, 12H NA, 12M 2, 12M 3, 12M 3 AWD, 130G, 1390, 140G, 140H, 140H ES, 140H NA, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H...
1090, 1190, 1190T, 120G, 1290T, 12G, 130G, 140B, 14G, 1673C, 173B, 183B, 215, 215B, 215C, 215D, 216, 216B, 216B3, 219D, 225, 225D, 226B, 226B3, 228, 229, 229D, 231D, 232B, 235, 235B, 235C, 235D, 236, ...
10 FT, 1190, 1190T, 120G, 120K, 120K 2, 120M, 120M 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M 2, 12M 3, 12M 3 AWD, 130G, 1390, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M ...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 1390, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140...
1140, 1145, 1150, 1160, 16, 1674, 1676, 225, 227, 229, 3145, 3150, 3160, 3208, 3406, 3406B, 3408, 416B, 416C, 416D, 420D, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 517, 5...
12G, 130G, 140G, 160G, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 35, 45, 55, 587R, 587T, 908, 910G, 933C, 950B, 963, 963B, 966D, 973, 980C, AP-1200, C11, C13, C15, C18, C...
120M, 120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 153, 160M, 160M 2, 160M 3, 160M 3 AWD, 225, 245, 24H, 2864C, 3116, 3126, 3126B, 3204, 3208, 3304, 336E, 336E H, 336E HVG, 336E ...
120G, 120M, 12G, 12M, 130G, 140G, 140M, 14M, 160M, 1673C, 16G, 16H NA, 16M, 215, 225, 231D, 235, 245, 24M, 3160, 318C, 3208, 320C, 320D, 320D FM, 320D L, 320D LN, 320D LRR, 320D RR, 320D2 L, 320E, 320...
10 FT, 10-20B, 120M, 12M, 140M, 14M, 160M, 16M, 2384C, 2484C, 24M, 303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304C CR, 304D CR, 304E, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 307B, 307C, 307D, 308C...
120G, 12F, 12G, 130G, 140H, 143H, 14E, 14G, 14H, 153, 16, 160H, 163, 163H, 16G, 16H, 16H NA, 172, 173B, 183, 183B, 191, 215, 215B, 215C, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 24...
9X0935
SEAL-O-RING
CS-551
CS-551
0775024
SEAL-O-RING
CS-551
CS-551
0780693
SEAL
CB-314, CS-431B, CS-551
CB-314, CS-431B, CS-551
0780691
SEAL
CB-314, CS-431B, CS-551
CB-314, CS-431B, CS-551
7X5579
SEAL
CS-431B, CS-551
CS-431B, CS-551
0983390
SEAL
CS-551
CS-551
0773358
SEAL-O-RING
CS-551, PR-105
CS-551, PR-105
0779927
SEAL-O-RING
CS-551
CS-551
7X5430
SEAL-O-RING
CP-433B, CS-431B, CS-551, SS-250
CP-433B, CS-431B, CS-551, SS-250
0773234
SEAL-O-RING
CP-433B, CS-431B, CS-551, SS-250
CP-433B, CS-431B, CS-551, SS-250
7X9412
SEAL
CS-551
CS-551
9X0546
SEAL AS
CS-551
CS-551