SEAL AS 9X4588 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     -     Guide Bolt
3/8-16 by 14 in     2    
- Nut
3/8-16     2    
- Washer     2    Start By:
Remove the relief valve. Refer to Disassembly and Assembly, "Relief Valve (Torque Converter Inlet) - Remove".
Illustration 1 g01446172
Remove O-ring seal (1) .
Illustration 2 g01446192
Illustration 3 g01446193
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Remove one bolt (2). Install Tooling (A) and tighten the nut onto plate (3). Repeat for remaining bolt (2) .
Repeat Step 2 for remaining bolt (2) .
Illustration 4 g01446251
Illustration 5 g01446252
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Loosen the nuts on Tooling (A) in order to release the tension on spring (4). Remove Tooling (A) and remove plate (3). Remove spring (4) .
Illustration 6 g01446289
Remove O-ring seal (5). Remove relief spool (6) .