9X4599 SEAL-LIP TYPE Caterpillar parts
24H, 24M, 307B, 307C, 308D, 308E, 308E2 CR, 330B L, 330C FM, 330D FM, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L ...
Rating:
Alternative (cross code) number:
CA9X4599
9X-4599
9X4599
CA9X4599
9X-4599
9X4599
Weight: 0.12 pounds 0 kg.
Information:
AXIAL WIDTH
8
mm
BORE DIAMETER
140
mm
MATERIAL
Polyurethane - 90 Duro
SEAL OD
140.18
mm
SHAFT OD
119.85
mm
EXCAVATOR, WHEELED EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Replacement for fits 9X4599 Seal Fits Caterpillar 350 365B II 365B L 365C L 365C L MH 374D L
CHCWIS
CHCWIS
Replacement for fits Seal 9X4599 Fits Caterpillar 390D 390DL 390FL 5080 5090B 5110B 568FMLL 988H
HAJKQFZK Replacement for fits Seal 9X4599 Fits Caterpillar 390D 390DL 390FL 5080 5090B 5110B 568FMLL 988H || Strict quality control standards to Build and test || Kindly provide us with your Appliance Model Number and we will check if it's the right part you need. If not, we will sell you the correct one || 【Designed】for user-friendly installation, saving you time and effort. || Brand New Condition: All parts are guaranteed to be brand new and unused
HAJKQFZK Replacement for fits Seal 9X4599 Fits Caterpillar 390D 390DL 390FL 5080 5090B 5110B 568FMLL 988H || Strict quality control standards to Build and test || Kindly provide us with your Appliance Model Number and we will check if it's the right part you need. If not, we will sell you the correct one || 【Designed】for user-friendly installation, saving you time and effort. || Brand New Condition: All parts are guaranteed to be brand new and unused
Compatible equipment models: 9X4599:
EXCAVATOR
330B L
330C FM
330D FM
345B
345B II
345B II MH
345B L
345C
345C L
345C MH
345D
345D L
345D L VG
349D
349D L
349E
349E L
349E L VG
349F L
350
350 L
365B
365B II
365B L
365C
365C L
365C L MH
374D L
374F L
375
375 L
385B
385C
385C FS
385C L
385C L MH
390D
390D L
390F L
568 FM LL
MINING EXCAVATOR
5110B
SHEAR-STRAIGHT
S465
Information:
Cleaning The Display
Clean the display by performing the following procedure:Note: The use of abrasive cleansers or solvents may damage the display window. Do not scrub the display window. Do not use brushes on the display window.
Disconnect the power from the monitor at the power supply.
Use a clean sponge or use a soft cloth to clean the display. Clean the display with a mild soap or detergent.
Dry the display with a chamois or dry the display with a moist cellulose sponge. Drying the display prevents water spots.Note: If the monitor has a touchscreen, it is possible for screen objects to activate during cleaning.Removing Paint And Grease
In order to remove paint and grease, perform the following procedure:
Before drying the display, remove fresh paint splashes and grease. Rub the paint or grease lightly with isopropyl alcohol.
Perform a final wash by using mild soap or a detergent solution.
Rinse with clean water.Note: Make sure that the isopropyl alcohol does not come in contact with the equipment labels. The printing on the labels may become smeared.
Clean the display by performing the following procedure:Note: The use of abrasive cleansers or solvents may damage the display window. Do not scrub the display window. Do not use brushes on the display window.
Disconnect the power from the monitor at the power supply.
Use a clean sponge or use a soft cloth to clean the display. Clean the display with a mild soap or detergent.
Dry the display with a chamois or dry the display with a moist cellulose sponge. Drying the display prevents water spots.Note: If the monitor has a touchscreen, it is possible for screen objects to activate during cleaning.Removing Paint And Grease
In order to remove paint and grease, perform the following procedure:
Before drying the display, remove fresh paint splashes and grease. Rub the paint or grease lightly with isopropyl alcohol.
Perform a final wash by using mild soap or a detergent solution.
Rinse with clean water.Note: Make sure that the isopropyl alcohol does not come in contact with the equipment labels. The printing on the labels may become smeared.
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
0931347
SEAL-O-RING
328D LCR, 345B II, 345B L, 345C, 345C L, 345D L, 349E L, 349E L VG, 349F L, 350, 365B, 365B II, 365B L, E650
328D LCR, 345B II, 345B L, 345C, 345C L, 345D L, 349E L, 349E L VG, 349F L, 350, 365B, 365B II, 365B L, E650
1132073
SEAL-O-RING
345B II, 345B L, 350, 365B, 365B II, 365B L
345B II, 345B L, 350, 365B, 365B II, 365B L
0951694
SEAL-O-RING
330, 330 FM L, 330 L, 330B, 330B L, E120B, W330B
330, 330 FM L, 330 L, 330B, 330B L, E120B, W330B
1307114
SEAL-O-RING
330B, 330B L, 345B, 345B L, W330B
330B, 330B L, 345B, 345B L, W330B
1659292
SEAL-LIP TYPE
365B, 365B L
365B, 365B L
2590734
SEAL-U-CUP
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
2667957
SEAL-BUFFER
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
2667960
SEAL-O-RING
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
2590736
SEAL-U-CUP
345B II, 345C, 345D, 345D L, 349D, 349D L
345B II, 345C, 345D, 345D L, 349D, 349D L
2667958
SEAL-BUFFER
345B II, 345C, 345D, 345D L, 349D, 349D L
345B II, 345C, 345D, 345D L, 349D, 349D L
3678472
SEAL-O-RING
365C, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
365C, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
3678473
SEAL-O-RING
390D, 390D L, 390F L
390D, 390D L, 390F L
5P1869
SEAL
307B, 844H, 953C, 963C, 990H, D6N LGP
307B, 844H, 953C, 963C, 990H, D6N LGP
1903011
SEAL-O-RING
307B, 307C, 308C
307B, 307C, 308C
1903010
SEAL-O-RING
307B, 307C, 308C
307B, 307C, 308C
1505878
SEAL
307B, 307C, 308C
307B, 307C, 308C
1336923
SEAL-O-RING
307B
307B
1336922
SEAL-O-RING
307B
307B
1336785
SEAL-BUFFER
307B, 312C L
307B, 312C L
1686760
SEAL-TRACK MASTER
307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E2 CR
307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E2 CR
1686759
SEAL-TRACK
307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E2 CR
307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E2 CR
1391603
SEAL
307B
307B
1511642
SEAL
307B, 307C
307B, 307C
1467026
SEAL
307B
307B