SEAL 9X4628 - Caterpillar

Illustration 1 g03862991
Table 1
Specification for 420-2329 Window Wiper Gp
Item Qty Part Specification Description
1 1 127-6509 Arm As Tension of the arm assembly is 4.5 0.5 N (1.0 0.1 lb).
2 1 175-3761 Window Wiper Arm Gp Tension of the arm assembly is 6.6 0.4 N (1.5 0.1 lb).
Illustration 2 g03862992
View of area A
Table 2
Item Qty Part Specification Description
3 - - Use the following torque to tighten the nut:
1. If mounted in glass, tighten the nut to 6.5 0.5 N m (57.5 4.4 lb in).
2. If mounted in steel, tighten the nut to 9 1 N m (80 9 lb in).
4 - - Use the following torque to tighten the nut:
1. If mounted in glass, tighten the nut to 6.5 0.5 N m (57.5 4.4 lb in).
2. If mounted in steel, tighten the nut to 7.5 0.5 N m (66.4 4.4 lb in).
5 1 5C-7261 Nut Use the following procedure to install the wiper arm:
1. Tighten the nut to 21 1 N m (186 9 lb in).
2. Wait for minimum of 0.5 hours to 4 hours maximum.
3. Again, tighten the nut to 21 1 N m (186 9 lb in).
C - - Wiping angle at automatic park position is 70 3 degrees.
Illustration 3 g03862997
View of area B
Table 3
Item Qty Part Specification Description
6 - - Use the following torque to tighten the nut:
1. If mounted in glass, tighten the nut to 6.5 0.5 N m (57.5 4.4 lb in).
2. If mounted in steel, tighten the nut to 9 1 N m (80 9 lb in).
7 - - Use the following torque to tighten the nut:
1. If mounted in glass, tighten the nut to 6.5 0.5 N m (57.5 4.4 lb in).
2. If mounted in steel, tighten the nut to 7.5 0.5 N m (66.4 4.4 lb in).
8 1 5C-7261 Nut Use the following procedure to install the wiper arm:
1. Tighten the nut to 21 1 N m (186 9 lb in).
2. Wait for minimum of 0.5 hours to 4 hours maximum.
3. Again, tighten the nut to 21 1 N m (186 9 lb in).
D - - Wiping angle at automatic park position is 110 3 degrees.