9X7261 SEAL AS Caterpillar parts
235B, 235C, 235D, 245, 245B, 245D
Rating:
Alternative (cross code) number:
CA9X7261
9X-7261
9X7261
CA9X7261
9X-7261
9X7261
Weight: 0.12 pounds 0 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$15.96
01 Dec 2018
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
CATERPILLAR SEAL A 9X7261 NEW
$9.47
09 Feb 2021
0.09 Kilograms
-: -
9X7261 - SEAL AS fits Caterpillar (CAT)
Warranty
Warranty
Number on catalog scheme:
18
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7638 Magnetic Holding Tool 12
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01259669
Illustration 2 g01259668
When installing the camshaft, make sure the number one cylinder is at top center of the compression stroke with the timing bolt installed in the flywheel. The camshaft timing is very important. The timing mark on the camshaft drive gear must line up with the timing mark on the idler gear. Refer to the Specifications Manual for more information.
Carefully install camshaft (4) in the cylinder block.
Ensure that the timing marks on camshaft drive gear (1), the idler gear, and the crankshaft gear are aligned.
Lower the valve lifters onto the camshaft. Remove Tooling (A).
Install thrust plate (3) and bolts (2) on camshaft drive gear (1).
Install the pushrods in the engine. End By:
Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and Install".
Install the rocker arms and the shaft. Refer to Disassembly and Assembly, "Rocker Arm and Shaft - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7638 Magnetic Holding Tool 12
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01259669
Illustration 2 g01259668
When installing the camshaft, make sure the number one cylinder is at top center of the compression stroke with the timing bolt installed in the flywheel. The camshaft timing is very important. The timing mark on the camshaft drive gear must line up with the timing mark on the idler gear. Refer to the Specifications Manual for more information.
Carefully install camshaft (4) in the cylinder block.
Ensure that the timing marks on camshaft drive gear (1), the idler gear, and the crankshaft gear are aligned.
Lower the valve lifters onto the camshaft. Remove Tooling (A).
Install thrust plate (3) and bolts (2) on camshaft drive gear (1).
Install the pushrods in the engine. End By:
Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and Install".
Install the rocker arms and the shaft. Refer to Disassembly and Assembly, "Rocker Arm and Shaft - Install".
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
215D, 229D, 231D, 235C, 235D, 245B, 245D, 621B, 627B, 637D, 776C, 777B, 784B, 785, 785B, 789, 789B, 793, 793B, 814B, 815B, 816B, 824C, 826C, 834B, 836, 916, 918F, 926, 928F, 936, 936F, 938F, 941, 943,...
235C, 235D
235C, 235D
235C, 235D, 245, 245B, 245D, 988K, 990, 990 II
245, 245B, 990, 990 II
235, 235C
235, 235C, 24H, 24M
235C, 245, 245B, 5230, D8N, D8R, D8R II, D8T
120M, 120M 2, 12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD, 235C, 235D, 245B, 533, 539, 543, 554, 564, 572R, 574, 574B, 623H, D6H, D6H XL, D6H XR, D6R, D7H, D7R, D8N, HA770, HA...
245B, 374D L, 374F L, 390F L, 844, 844H, 844K, 854G, D10N, D10R, D10T, D10T2, D8L, D9N, D9R, D9T
231D, 235D, 973
231D, 235D, 943, 953, 953B, 963, 963B, 973
235B, 235C, 235D, 245, 245B, 245D
229, 235, 235C, 245, 527, 572G, 572R, 572R II, 574, 953, 963B, 963C, 973, 973C, 973D, BG-2455C, D5E, D5H, D6D, D6E, D6E SR, D6G, D6G SR, D6H, D6H XL, D6R, D6R II, D7G, D7H, D7R, D7R II
229D, 231D, 235, 235C, 578, 988B, 988F, 988F II, 992C, 992D, D10N, D11N, D11R, D250D, R1700 II, R1700G
229D, 231D, 539, 623F, 824G II, 824H, 834G, 834H, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 960F, 962G, 962G II, D7H, D7R, D7R II, D7R XR, HYDRAULIC, IT62G, IT62G II
229D, 231D, 235, 235C, 578, 988B, 988F, 988F II, 992C, 992D, D10N, D11N, D11R, D250D, R1700 II, R1700G
225D, 227, 229D, 231D, 235B, 245B, 365B, 365B II, 365C, 385C, 385C FS, 5080, 5090B, 5130, 5130B, 539, 824G II, 824H, 834G, 834H, 963D
235, 235C, 245B
235, 235C, 245, 245B, 5230, 651E, 657E, 657G, 966H, 972H, 980G, 980G II, 980H, 988B, 988F, 988F II, 994, 994D, 994F, 994H, D11N, D11R, D11T
235, 235C, 245, 245B
235C, 235D
6V2488
SEAL
225D, 231D, 320B, 5230, 627H
225D, 231D, 320B, 5230, 627H
235C, 235D, 245, 245D, 330B L, 330C FM, 330D FM, 365B, 365B II, 365C, 385C, 385C FS, 5080, 5090B, 568 FM LL, 844, 844H, 854G, 854K, 980C, 980F, 980F II, 980G, 980G II, 980H, D11N, D11R, D11T