9X7262 SEAL-LIP TYPE Caterpillar parts
235B, 235C, 235D, 245, 245B, 245D
Rating:
Alternative (cross code) number:
CA9X7262
9X-7262
9X7262
CA9X7262
9X-7262
9X7262
Weight: 0.31 pounds 0 kg.
EXCAVATOR,
Number on catalog scheme:
16
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7638 Magnetic Holding Tool 12 Start By:
Remove the rocker arms and the shaft. Refer to Disassembly and Assembly, "Rocker Arm and Shaft - Remove".
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Remove the pushrods from the engine.
Turn the crankshaft to top center compression stroke for the No. 1 piston. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
Illustration 1 g01259668
Illustration 2 g01259669
Ensure that the timing marks on camshaft drive gear (1), the idler gear, and the crankshaft gear are aligned.
Use Tooling (A) to position the valve lifters away from the camshaft.
Remove bolts (2) and thrust plate (3).
Remove camshaft (4) from the cylinder block.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7638 Magnetic Holding Tool 12 Start By:
Remove the rocker arms and the shaft. Refer to Disassembly and Assembly, "Rocker Arm and Shaft - Remove".
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Remove the pushrods from the engine.
Turn the crankshaft to top center compression stroke for the No. 1 piston. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
Illustration 1 g01259668
Illustration 2 g01259669
Ensure that the timing marks on camshaft drive gear (1), the idler gear, and the crankshaft gear are aligned.
Use Tooling (A) to position the valve lifters away from the camshaft.
Remove bolts (2) and thrust plate (3).
Remove camshaft (4) from the cylinder block.
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
215D, 229D, 231D, 235C, 235D, 245B, 245D, 621B, 627B, 637D, 776C, 777B, 784B, 785, 785B, 789, 789B, 793, 793B, 814B, 815B, 816B, 824C, 826C, 834B, 836, 916, 918F, 926, 928F, 936, 936F, 938F, 941, 943,...
235C, 235D
235C, 235D
235C, 235D, 245, 245B, 245D, 988K, 990, 990 II
245, 245B, 990, 990 II
235, 235C
235, 235C, 24H, 24M
235C, 245, 245B, 5230, D8N, D8R, D8R II, D8T
120M, 120M 2, 12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD, 235C, 235D, 245B, 533, 539, 543, 554, 564, 572R, 574, 574B, 623H, D6H, D6H XL, D6H XR, D6R, D7H, D7R, D8N, HA770, HA...
245B, 374D L, 374F L, 390F L, 844, 844H, 844K, 854G, D10N, D10R, D10T, D10T2, D8L, D9N, D9R, D9T
231D, 235D, 973
231D, 235D, 943, 953, 953B, 963, 963B, 973
229, 235, 235C, 245, 527, 572G, 572R, 572R II, 574, 953, 963B, 963C, 973, 973C, 973D, BG-2455C, D5E, D5H, D6D, D6E, D6E SR, D6G, D6G SR, D6H, D6H XL, D6R, D6R II, D7G, D7H, D7R, D7R II
229D, 231D, 235, 235C, 578, 988B, 988F, 988F II, 992C, 992D, D10N, D11N, D11R, D250D, R1700 II, R1700G
229D, 231D, 539, 623F, 824G II, 824H, 834G, 834H, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 960F, 962G, 962G II, D7H, D7R, D7R II, D7R XR, HYDRAULIC, IT62G, IT62G II
229D, 231D, 235, 235C, 578, 988B, 988F, 988F II, 992C, 992D, D10N, D11N, D11R, D250D, R1700 II, R1700G
225D, 227, 229D, 231D, 235B, 245B, 365B, 365B II, 365C, 385C, 385C FS, 5080, 5090B, 5130, 5130B, 539, 824G II, 824H, 834G, 834H, 963D
9G6549
SEAL-O-RING
5230, 615C, 631E, 784B, 785B, 789B, 793B, D11N, D11R
5230, 615C, 631E, 784B, 785B, 789B, 793B, D11N, D11R
235, 235C, 245, 245B, 5230, 651E, 657E, 657G, 966H, 972H, 980G, 980G II, 980H, 988B, 988F, 988F II, 994, 994D, 994F, 994H, D11N, D11R, D11T
235, 235C, 245, 245B
235C, 235D
6V2488
SEAL
225D, 231D, 320B, 5230, 627H
225D, 231D, 320B, 5230, 627H
235C, 235D, 245, 245D, 330B L, 330C FM, 330D FM, 365B, 365B II, 365C, 385C, 385C FS, 5080, 5090B, 568 FM LL, 844, 844H, 854G, 854K, 980C, 980F, 980F II, 980G, 980G II, 980H, D11N, D11R, D11T
235B, 235C, 235D, 245, 245B, 245D