SEAT GP-SUSPENSION 1082188 - Caterpillar

Illustration 10 g01248859
Illustration 11 g01248914
Use Tooling (E) in order to remove bearings (20) and (21). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1P-1863 Retaining Ring Pliers 1
B 1U-9200 Lever Puller Hoist 1
C 138-7575 Link Bracket 1
D 189-0408 Shackle As 1
F 1P-0510 Driver Gp 1
Illustration 12 g01248857
Connect hose assemblies (16), (17), (18), and (19). Install hose assemblies (16), (17), (18), and (19). Install clamps (13), (14), and (15).
Illustration 13 g01249077
Lower the temperature of bearings (20) and (21). Use Tooling (F) in order to install bearings (20) and (21).
Illustration 14 g01248851
Illustration 15 g01248765
Attach Tooling (D) and a suitable lifting device to bucket (10). The weight of bucket (10) is approximately 1134 kg (2500 lb). Install bucket (10).
Illustration 16 g01248837
Install pin assembly (12). Install any shims that were removed in the removal procedure. Use Tooling (A) in order to install retaining ring (11). Repeat for the other side.
Illustration 17 g01248762
Attach a suitable lifting device to tilt cylinder (5). The bucket linkage will be removed with tilt cylinder (5) as a unit. The weight of tilt cylinder (5) and the bucket linkage is approximately 60 kg (132 lb).
Illustration 18 g01384266
Remove Tooling (B) and Tooling (C) from tilt cylinder (5).
Illustration 19 g01248763
Install pin assemblies (7) and (9). Install any shims that were present during the removal procedure. Use Tooling (A) in order to install retaining rings (6) and (8).
Illustration 20 g01384254
Install bucket positioner (1). Install pin (4). Install clip (3).
Illustration 21 g01384252
Install the lower half of bucket positioner (1) onto the bucket linkage. Install the washer. Use Tooling (A) in order to install retaining ring (2).