SEAT GP-ADJUSTABLE 2402280 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-5255 Hydraulic Jack 1
Be sure that the shaft of the track carrier roller and the bore in the mounting bracket on the undercarriage frame are clean and free of dirt.
Illustration 1 g00365374
Illustration 2 g01435095
Position track carrier roller (2) in the mounting bracket. The weight of track carrier roller (2) is approximately 14 kg (30 lb). Adjust track carrier roller (2) until Dimension (B) is achieved. Dimension (B) is 4.5 0.5 mm (0.18 0.02 inch).
After adjusting the position of the carrier roller in the mounting bracket, tighten bolt (1).
Be sure that the carrier roller rotates smoothly by hand. Slowly lower the track assembly to track carrier roller (2) with Tooling (A).
Tighten the tension of the track. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust".