SEAT GP-SUSPENSION 2584055 - Caterpillar

1. Install tooling (A) and a hoist on the fender. Remove the bolts that fasten the fender to the rear of the cab and the vehicle frame. Remove fender (1). The weight of the fender is approximately 47 kg (103 lb). 2. Remove eight clamps (3). Remove the clamp on the back of bracket assembly (2). 3. Use tooling (B) to lift the machine and install metal blocks (4) between the axle and the frame. Lower the machine on the blocks. 4. Remove hose assemblies (5) and (6). 5. Remove four bolts (7). 6. Install nylon straps and a hoist on the bracket assembly. Remove bar (8) and pin assembly (9). 7. Remove bracket assembly (2) and rings (10). Weight of the bracket assembly is 55 kg (121 lb). 8. Install a hoist on axle suspension cylinder (11). 9. Remove bar (13) and head plate (12). 10. Install head plate (12) on the wheel side of pin (14). Use a pry bar to remove the pin. 11. Remove axle suspension cylinder (11) and rings (15). Weight of the cylinder is approximately 80 kg (176 lb). The following steps are for installation of the axle suspension cylinder.12. Install a hoist on the axle suspension cylinder (11) and put it in position.13. Put rings (15) in position and install pin (14). Remove the three bolts and head plate (12).14. Install head plate (12) and bar (13).15. Install a hoist on bracket assembly (2) and put it in position. Install rings (10).16. Install pin (9) and bar (8).17. Install four bolts (7).18. Install hose assemblies (5) and (6).19. Lift the machine with tooling (B) and remove metal blocks (4). Lower the machine and remove tooling (B).20. Install eight clamps (3). Install the clamp on the back of bracket assembly (2).21. Install tooling (A) and a hoist on fender (1). Install the fender.